این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
شنبه 29 آذر 1404
International Journal of Engineering
، جلد ۳۶، شماره ۶، صفحات ۱۱۹۳-۱۲۰۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Electrolyte Temperature Dependency of Electrodeposited Nickel in Sulfate Solution on the Hardness and Corrosion Behaviors
چکیده انگلیسی مقاله
The hardness and corrosion resistance of nickel (Ni) deposit on a substrate could be reached by controlling electrolyte temperature during deposition. In this research, the electrodeposition of Ni at various temperatures of electrolytes was performed. Electrodeposited Ni films using an optical digital camera, X-ray diffraction (XRD), scanning electron microscope with energy-dispersive x-ray spectroscopy (SEM-EDS), microhardness test, and potentiostat were investigated. The bright deposit occurred at 25 °C; an increase in the temperature to 40 °C leads to a change of color into semi-bright. Shifting to a higher temperature would increase the deposition rate, cathodic current efficiency, grain size, and oxygen content. The X-ray reflections in the planes (111), (200), and (220) correspond to as the Ni phase with a face center cubic (FCC) crystal structure. Decreasing crystallite size and micro-strain promoted to reach high hardness. Increasing the corrosion current density implies decreasing polarization resistance. The sample at the lowest electrolyte temperature has a better hardness, and the sample formed at 25 °C sulfate solution had less corrosion rate.
کلیدواژههای انگلیسی مقاله
Ni Films,Electrodeposition,Crystallite Size,Micro-strain
نویسندگان مقاله
S. Syamsuir |
Departement of Mechanical Engineering, Universitas Negeri Jakarta, Indonesia
B. Soegijono |
Department of Geoscience, Universitas Indonesia, Indonesia
S. D. Yudanto |
Research Center for Metallurgy - National Research and Innovation Agency, Indonesia
B. Basori |
Department of Mechanical Engineering, Universitas Nasional, Indonesia
M. K. Ajiriyanto |
Research Center for Nuclear Fuel Cycle and Radioactive Waste Technology - National Research and Innovation Agency, Indonesia
D. Nanto |
Department of Physics Education, UIN Syarif Hidayatullah, Indonesia
F. B. Susetyo |
Departement of Mechanical Engineering, Universitas Negeri Jakarta, Indonesia
نشانی اینترنتی
https://www.ije.ir/article_171234_184c6b462ed100f6475fa292dbf8fe56.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات