این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Engineering، جلد ۳۶، شماره ۴، صفحات ۷۸۸-۷۹۶
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی High Energy Release-high Retraction Smart Polymer Fibers used in Artificial Muscle Fabrication
چکیده انگلیسی مقاله Shape-memory polymers (SMPs) could remember their original shape and then, return to their initial shape upon stimulus. So far, quantities such as fixity and recovery ratio of SMPs have been broadly reported. Nevertheless, one main issue is the existence and use of an appropriate approach to quantitatively estimate the SMPs released energy. In addition, it is hypothesized that the elastic behavior of SMPs plays an underlying role when SMP fibers need to exhibit high-tension and high-elongation capacity as required in synthetic muscles. Here, we present, for first time, SMP trinary bulk and filament systems of acrylonitrile butadiene styrene (ABS)/thermoplastic polyurethane (TPU)/ethylene vinyl acetate (EVA) fabricated under calendering intense shear mixing and hot pressing. A digital blocked force load cell was used to record specimens energy released. The results exhibited high retraction from the specimens secondary shape correlated to the tensile behavior. It was shown the blended system of 50, 25 and 25% of TPU, ABS and EVA, respectively, resulted in ~640% and 3900% increase in the elastic modulus and energy release compared to EVA/TPU systems. The double SMP filaments led to a 50% increase in the energy release compared to single fibers. Nevertheless, the blended binary specimens with the TPU/ABS ratio of 50/50 exhibited 600% increase in tensile strength. It was confirmed the elastic modulus, number of fibers and elongation at break govern the SMP stored. The findings of the research lightened a new class of SMPs to be used as fiber-based artificial muscles and orthodontic products.
کلیدواژه‌های انگلیسی مقاله Blocked force,Energy release,Tensile Behavior,Smart fiber,Shape-memory polymer
نویسندگان مقاله M. Karevan |
Department of Mechanical Engineering, Isfahan University of Technology, Isfahan, Iran

M. A. Motalleb |
Department of Mechanical Engineering, Isfahan University of Technology, Isfahan, Iran

A. Jannesari |
Department of Mechanical Engineering, Isfahan University of Technology, Isfahan, Iran

M. Zeinali |
Department of Mechanical Engineering, Isfahan University of Technology, Isfahan, Iran

نشانی اینترنتی https://www.ije.ir/article_166444_d4098b8b0bf960e18129b12306518458.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات