این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Engineering، جلد ۳۶، شماره ۲، صفحات ۱۹۱-۱۹۸
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Tool Life of Uncoated and Coated Inserts during Turning of Ti6Al4V-ELI under Dry and Minimum Quantity Lubrication Environments
چکیده انگلیسی مقاله This paper mainly deals with the tool wear characteristics of uncoated cemented carbide insert and PVD AlTiN, PVD TiAlN coated carbide inserts during turning of Ti6Al4V-ELI (Extra Low Interstitial). To satisfy the sustainability conditions, the experiments have been conducted under dry and minimum quantity lubrication (MQL) environment. To enhance the effectiveness of MQL, palm oil has been used as the cutting fluid. The same machining parameters are employed for all the cutting tool inserts in dry and MQL environments to understand the machining characteristics better. It was found that cutting speed greatly influences average flank wear. Tool life of PVD TiAlN coated tool is more in both MQL, and dry environments as compared to uncoated cemented carbide insert and PVD AlTiN coated insert. Using palm oil under the MQL environment has produced better results while turning by PVD TiAlN insert. The characteristics like good cooling and lubrication provided significantly less average flank wear during machining of Ti6Al4V-ELI under the MQLenvironment.
کلیدواژه‌های انگلیسی مقاله Ti6Al4V-ELI,Uncoated Insert,PVD AlTiN,PVD TiAlN,Dry,Minimum Quantity lubrication,Tool Life
نویسندگان مقاله S. R. Nipanikar |
Babasaheb Ambedkar Technological University, Lonere, Maharashtra, India & Department of Mechanical Engineering, Karmaveer Bhaurao Patil College of Engineering, Satara, Maharashtra, India

G. D. Sonawane |
Babasaheb Ambedkar Technological University, Lonere, Maharashtra, India & Sandip Foundation’s SITRC, Nashik, India

V. G. Sargade |
Mechanical Engineering Department, Babasaheb Ambedkar Technological University, Lonere (Maharashtra), India

نشانی اینترنتی https://www.ije.ir/article_159838_ba69f35e9555a87ecb6c438eb53e4973.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات