این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Engineering، جلد ۳۶، شماره ۱، صفحات ۱۹-۲۷
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Investigating the Effect of Considering Different Cross Section Design in Friction Stir Welded Joint Line of Dissimilar Aluminum Alloys
چکیده انگلیسی مقاله Using friction heat, welded joints of the Friction stir welding (FSW) process are made that are utilized to forge metal components together. Since there is no parent metal melting, several advantages are obtained by the FSW process over fusion welding. The alloys AA6XXX and AA7XXX Al are two sets of the most extensively utilized structural materials in rail transportation, automotive, and aerospace industries. The objective of present study was to investigate the effects of novel cross-sections in joint lines and further analyze the improvement in mechanical features. Due to the importance of the weld zone properties, many researchers seek to improve the mechanical behavior of the weld zone. For this, friction stir welded joint under four different new design in cross section named E1, E2, E3, E4 and one conventional cross section, E5 were conducted. Better outcomes are obtained by joints made utilizing this method based on joint quality and strength. The very good tensile features are displayed by the fabricated joints with Ultimate Tensile Strength (UTS)> 254 MPa and elongation > 7%. The highest UTS value which is occurred in E3 condition (Downward step) is 24.7% higher than required for FSW of AA6061 alloy at T6 condition in the American Welding Society (AWS) standard (186 MPa).
کلیدواژه‌های انگلیسی مقاله Friction Stir Welding,Cross Section in Joint line,tensile properties
نویسندگان مقاله M. Tamjidi |
Department of Industrial Engineering, Velayat University, Iranshahr, Iran

K. Danesh Narooei |
Department of Industrial Engineering, Faculty of Industry and Mine Khash, University of Sistan and Baluchestan, Zahedan, Iran

نشانی اینترنتی https://www.ije.ir/article_157577_9a9bfc8c1acdb23765d566f0d8ed50a0.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات