این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Engineering، جلد ۳۵، شماره ۱۲، صفحات ۲۳۱۳-۲۳۲۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Stern Flap Application on Planing Hulls to Improve Resistance
چکیده انگلیسی مقاله Drag is one of the main factors in improving fuel efficiency. Various study in regards to improve drag performance of a planing hull amongst them is a stern flap. The main parameters to design a stern flap are span length and angle of stern flap. The stern flap works by changing pressure distribution over the ship's bottom and creating a lift force on the stern transom part. This study aims to analyze the behavior of stern flap in variations of span length and angle of stern flap towards drag performance of Fridsma hull form. Finite Volume Method (FVM) and Reynolds-Averaged Navier - Stokes (RANS) are used to predict the hull resistance during simulations. Results show that shear drag is very sensitive towards the total drag value, proving that shear drag valued at least 60% of the total drag in each planing hull multi-phase characteristics phase. Stern flap with 58% of hull breadth span length installed at 0° is considered the most optimal, reducing 10.2% of total drag, followed by 18% displacement reduction. In conclusion, the stern flap effectively improves the Fridsma hull’s total drag and its components on 0.89 < Fr < 1.89.
کلیدواژه‌های انگلیسی مقاله Drag,Stern Flap,Planing hull,Finite volume,Shear Force,Lift force
نویسندگان مقاله U. Budiarto |
Department of Naval Architecture, Faculty of Engineering, University of Diponegoro, Semarang, Indonesia

S. Samuel |
Department of Naval Architecture, Faculty of Engineering, University of Diponegoro, Semarang, Indonesia

A. A. Wijaya |
Department of Naval Architecture, Faculty of Engineering, University of Diponegoro, Semarang, Indonesia

S. Yulianti |
Department of Naval Architecture, Faculty of Engineering, University of Diponegoro, Semarang, Indonesia

K. Kiryanto |
Department of Naval Architecture, Faculty of Engineering, University of Diponegoro, Semarang, Indonesia

M. Iqbal |
Department of Naval Architecture, Ocean, and Marine Engineering, University of Strathclyde, Glasgow, UK

نشانی اینترنتی https://www.ije.ir/article_156180_920662c25ef8bf7d34815bccecfa3661.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات