این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Engineering، جلد ۳۵، شماره ۹، صفحات ۱۶۹۰-۱۶۹۸
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Experimental Evaluation on Palm Oil and Sesame Oil-based Resin Properties as Core Sandwich Material for Lightweight Ship Structure
چکیده انگلیسی مقاله Research on lightweight material on ship structure has taken giant steps during the last decade. One reason is that shipping activities have increased and, therefore, the possibility of increasing the carrying cargo capacity in a realistic way using advanced lightweight material. This article summarizes a research investigation regarding the experimental tests of vinyl ester bio resin material using palm oil and sesame oil based on Lloyd's Register (LR) standard. Several tests were conducted, including density, water absorption test, Fourier transformed infrared test (FTIR), scanning electron microscope (SEM), and mechanical tests to evaluate the effect of 2-10% addition of vegetable oils on mechanical properties. The influence of the addition of vegetable oils is successfully characterized using physical measurements, which indicate the possible formation of a polymer blend to increase in elongation value. Mechanical testing shows that adding vegetable oils causes a decrease in average density, hardness, bending strength, and tensile strength. The bending strength decreases about 9.20 – 47.06% for 2-10% palm oil addition and 5.33 – 42.40% for sesame oil addition. Moreover, vegetable oil causes a tensile strength decrease of about 5-18.75% on palm oil and 3.75-13.75% on sesame oil. As summarized, bio resin based on sesame oil has better mechanical behavior with the oil addition of 4-8% fulfills all Lloyd’s Register criteria.
کلیدواژه‌های انگلیسی مقاله Bio Resin,Palm oil,Sesame oil,Core Sandwich,Ship Structure
نویسندگان مقاله T. Tuswan |
Department of Naval Architecture, Universitas Diponegoro, Semarang, Indonesia

E. N. Sari |
Departement of Mechanical Engineering, Universitas Billfath, Lamongan, Indonesia

A. Ismail |
Ship Machinery Study Program, Indonesia Defense University, Belu, Indonesia

A. R. Prabowo |
Department of Mechanical Engineering, Universitas Sebelas Maret, Surakarta, Indonesia

نشانی اینترنتی https://www.ije.ir/article_147633_8c44fd1c84114fe1696d62639f87d5ad.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات