این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Engineering، جلد ۳۵، شماره ۹، صفحات ۱۷۷۹-۱۷۸۶
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Influence of Tensile Load on Bonding Strength of Asphalt Concrete Containing Modified Buton Asphalt and Polyethylene Terephthalate Waste: A Case Study of Indonesian Roads
چکیده انگلیسی مقاله The natural bitumen coalesced with the sediment in Buton Island, Indonesia, is known as Buton rock asphalt (BRA). Modified Buton Asphalt (MBA) is one of the latest bitumen processing that extracted bitumen from BRA and furtherly mixed with petroleum bitumen. In Indonesia drinking bottle is made by used extensively the polyethylene terephthalate (PET) for domestic consumption. This research used PET waste of 0.5% to 2.5% of the total weight of aggregates and filler, while MBA was the main binder to produce AC-WC mixture. One mixture without PET waste and five mixtures containing PET waste of 0.5%, 1.0%, 1.5%, 2.0% and 2.5% were produced to determine the compatibility of PET with MBA related to the bonding strength of the AC-WC mixture. Indirect tensile strength test equipped with deformation measurement devices was carried out with the aim to understand the bonding strength related to the vertical stress-strain relationship, peak tensile stress, Modulus of elasticity in tension and toughness index  of each mixture. The test results showed that MBA was compatible with blending with PET waste in producing compacted specimens. The results of quantitative observations showed that the presence of PET waste made the mixtures better than the mixture without PET in terms of stiffness and elastic region. The peak tensile stress of mixture increased by 45.2% to 96.8% with PET waste compared to the mixture without PET. The mixture containing PET waste was 56.09% to 157.18% higher than the mixture without PET in terms of Et. Toughness index (TI) increased with the use of PET waste up to 2.0%, but was smaller at 2.5% PET waste compared to the mixture without PET waste.
کلیدواژه‌های انگلیسی مقاله Tensile load,Bonding Strength,Modified Buton asphalt,Polyethylene Terephthalate Waste
نویسندگان مقاله M. Pasra |
Civil Engineering Department, Hasanuddin University, Makassar, Indonesia

M. W. Tjaronge |
Civil Engineering Department, Hasanuddin University, Makassar, Indonesia

M. A. Caronge |
Civil Engineering Department, Hasanuddin University, Makassar, Indonesia

A. R. Djamaluddin |
Civil Engineering Department, Hasanuddin University, Makassar, Indonesia

F. E. P. Lapian |
Merauke National Road Implementation Centre, Papua Province, Indonesia

M. Tumpu |
Disaster Management Department, Hasanuddin University, Makassar, Indonesia

نشانی اینترنتی https://www.ije.ir/article_152782_e32d22a54b90bbdf2a37690c0f846717.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات