این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Engineering، جلد ۳۵، شماره ۸، صفحات ۱۶۱۹-۱۶۲۸
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Improving Punching Shear in Flat Slab by Replacing Punching Shear Reinforcement by Ultrahigh Performance Concrete
چکیده انگلیسی مقاله Extensive studies have focussed on the issue of the failure of punching shear in flat slabs and ways to strengthen it internally, externally and the importance of this structure (flat slab), and the danger of punching shear failure in the areas of connection of the column - slab. Therefore, this study was based on strengthening the bearing capacity of the flat slab to failure of punching shear with high-performance concrete (UHPC); because it is expensive, so it is not feasible to use it for the whole slab. Therefore, the aim of the study was to replace reinforcement punching shear with UHPC and to determine its optimal use in the shear area. Six samples of flat slabs reinforced with maximum flexural steel loaded with a column  in the middle, four forms of UHPC casting instead of shear reinforcement and at two different depths were used. The results showed an  improvement in the punching shear strength of the sample cast with UHPC instead of punching shear reinforcement (ACI 318-19) and with all thickness of the slab, it to arrived twice compared to reference sample (NSC) with reinfored flexural steel only. This is the perfect application for the UHPC. It was also noted that casting UHPC with half the thickness of the slab does not give good results compared to those casting with all thicknesses, despite doubling the distance of the UHPC from all faces of the column; but it changes the failure pattern and keeps it away from the danger areas near the unwanted columns.
کلیدواژه‌های انگلیسی مقاله Flat slab,Punching shear,Shear Reinforcement Steel,ultra high performance concrete,Steel Fiber
نویسندگان مقاله H. Y. Talib |
Civil Engineering Department, College of Engineering, Babylon University, Iraq

N. H. A. Al-Salim |
Civil Engineering Department, College of Engineering, Babylon University, Iraq

نشانی اینترنتی https://www.ije.ir/article_148594_2d7976bc6c5ac384582eb5fb212763f1.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات