این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Engineering، جلد ۳۵، شماره ۸، صفحات ۱۶۶۲-۱۶۷۳
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Optimal Sizing of Battery Energy Storage System in Commercial Buildings Utilizing Techno-economic Analysis
چکیده انگلیسی مقاله Finding the correct battery size is important to the project's financial success. Many studies utilize complicated simulations to identify the optimal battery size. It is also difficult to reuse the outcomes of such optimization in other projects. In this paper, by introducing the factor β as the energy to power ratio, a simple techno-economic model is proposed to allow a quick evaluation of the feasibility of a building-integrated battery energy storage system (BI-BESS) and can apply to all commercial buildings that use the same tariff structure and is independent on the building load profile. Because the battery's energy and power are coupled, defining β allows both metrics to be addressed, resulting in high accuracy. For validating the results, the load profile from a commercial building based on Malaysia's tariff structure is used, and the optimal size of the battery is obtained from the proposed techno-economic model with the help of a Benefit-cost ratio (BCR) and simple iterative model for peak shaving. The results reveal that after finding the optimal BCR=1.08, the optimal battery size is achieved at 66.84 kWh. However, considering the market interests in the payback period, the economic feasibility of installing BESS is evaluated at BCR= 1.7, which is higher than our results. Hence, the impact of battery cost reduction is assessed.
کلیدواژه‌های انگلیسی مقاله Battery Sizing,Benefit-cost Ratio,Payback Period,peak shaving,Techno-economic analysis
نویسندگان مقاله A. Ashabi |
UM Power Energy Dedicated Advanced Centre (UMPEDAC), University of Malaya, Kuala Lumpur, Malaysia

M. M. Peiravi |
Department of Mechanical Engineering, Technical and Vocational University (TVU), Tehran, Iran

P. Nikpendar |
Department of Mechanical Engineering, Babol Noshirvani University of Technology, Babol, Iran

S. Salehi Nasab |
Department of Computer Engineering, Lorestan University, Khorramabad, Iran

F. Jaryani |
Faculty of Computer Science and Information System, Universiti Teknologi Malaysia

نشانی اینترنتی https://www.ije.ir/article_150151_e050da3ed80446b9b3bd9752bdcfb60f.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات