این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Engineering، جلد ۳۵، شماره ۵، صفحات ۸۵۵-۸۶۴
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Influence of Mixing Conditions of Modified Bitumen on Moisture Sensitivity of Asphalt Compounds
چکیده انگلیسی مقاله Modification of bitumen allows an improving the properties of bitumen, which can be a useful technique to enhance asphalt’s characteristics. Therefore, this research intended to study the effect of mixing time of different percentages of epoxy resin, between 0 to 8%, doped into bitumens on the moisture sensitivity of asphalt compounds containing two types of aggregates, i.e. limestone and siliceous. For this aim, the Sessile Drop Method (SDM) was employed, and moisture resistant parameters associated to surface free energy concept such as surface free energy components, work of cohesion, work of adhesion, work of debonding, adhesion bitumen to aggregate, and wetting bitumen around aggregate surface were assessed. The results revealed that the effect of the mixing time of bitumen and epoxy resin on moisture resistance properties of asphalt compounds significantly depends on the percentage of epoxy resin used in bitumen mixture. For bitumens with 4 and 6% epoxy resin, adhesion and wetting parameters had a similar performance for both mixing times of 10 and 60 minutes.  However, asphalt compounds containing 2 and 8% epoxy resin modified bitumens prepared for 10 min mixing time had a better adhesion and wetting performance than those prepared for the longer mixing time, 60 minutes.  The effect of mixing time of bitumen modified with epoxy resin on the bitumen and asphalt compound’ performance depend on the percent of additive in the bitumen.
کلیدواژه‌های انگلیسی مقاله Bitumen,Epoxy resin,Mixing time,Moisture Sensitivity,Surface Free Energy
نویسندگان مقاله H. Bahmani |
Department of Civil Engineering, Yazd University, Yazd, Iran

H. Khani Sanij |
Department of Civil Engineering, Yazd University, Yazd, Iran

R. Roshani |
Department of Civil Engineering, Yazd University, Yazd, Iran

M. M. Majidi Shad |
Department of Civil Engineering, Yazd University, Yazd, Iran

S. H. Hosseini |
Department of Chemical Engineering, Ilam University, Ilam, Iran

M. Edalati |
Department of Civil Engineering, Ilam University, Ilam, Iran

M. Olazar |
Department of Chemical Engineering, University of the Basque Country UPV/EHU, Bilbao, Spain

S. A. Almasi |
Department of Transportation Planning, Imam Khomeini International University, Qazvin, Iran

نشانی اینترنتی https://www.ije.ir/article_143885_7132a68a64369dd3fce5f93b4d8879d6.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات