این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
چهارشنبه 3 دی 1404
International Journal of Engineering
، جلد ۳۵، شماره ۵، صفحات ۹۴۳-۹۵۳
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Numerical Investigation of Geometric Parameters Effects on Heat Transfer Enhancement in a Manifold Microchannel Heat Sink
چکیده انگلیسی مقاله
Microchannel heat sink has been employed and as a part of electronic equipment extensively investigated. In this investigation, heat transfer and fluid flow features of laminar flow of water in a manifold microchannel heat sink (MMHS) was numerically simulated. Selected heat flux was 100 W/m^2 and water was as working fluid. The effect of length of inlet/outlet ratio (λ=L
inlet
/L
outlet
), the height of microchannel (H
ch
), and width of the microchannel (W
ch
) at Reynolds number (Re) range from 20 to 100 as independent parameters on the fluid flow and heat transfer features were examined. Obtained results demonstrate that in MMHS, the impinging jet on the bottom channel surface, inhibits the growth of hydrodynamic and thermal boundary layers, resulting in an enhanced heat transfer rate. Also, by increasing Re and keeping the geometric parameters constant, the heat transfer rate increases. Based on the present investigation, for low Re, it is better to choose a λ=L
inlet
/L
outlet
>1 and for high Re, choose a λ<1. For low Re, maximum of performance evaluation criterion (PEC
max
) is obtained at H
ch
=300µm, and for high Re, PEC
max
is obtained at H
ch
=240µm. for Re=20 to 100, the maximum of PEC
max
is 1.765 and obtained at Re=100 and H
ch
=240µm.
کلیدواژههای انگلیسی مقاله
Manifold microchannel heat sink,thermophysical properties,Heat transfer enhancement,Performance evaluation criterion
نویسندگان مقاله
M. R. Babaei |
Department of Mechanical Engineering, University of Kashan, Kashan, Iran
G. A. Sheikhzadeh |
Department of Mechanical Engineering, University of Kashan, Kashan, Iran
A. A. Abbasian Arani |
Department of Mechanical Engineering, University of Kashan, Kashan, Iran
نشانی اینترنتی
https://www.ije.ir/article_144685_4422f56306aa810e76beaea1d422ddb0.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات