این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
سه شنبه 2 دی 1404
International Journal of Engineering
، جلد ۳۵، شماره ۲، صفحات ۴۰۶-۴۱۶
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Numerical Study of Shunting Effect in Three-steel Sheets Resistance Spot Welding
چکیده انگلیسی مقاله
The main purpose of the present research is to investigate the shunting phenomenon in a three-sheet RSW joint using finite element simulation. To this end, a three-sheet resistance spot welding joint was simulated as an electrical-thermal-mechanical coupling problem. To validate the presented simulation, the finite element results were compared with the experimental results, including nugget size and geometric shape in the resistance spot welding joint. Afterwards, the multi-spot welds of three-sheet low carbon steels with the same thicknesses were analyzed considering the sequential distance of 45 mm. Various techniques, including new spot-weld diameter measurement, electrical current density, electrical contact conductivity, and electrode displacement, were used to study shunting effects in the process of consecutive spot welds. The results obtained from different methods have greatly matched each other. Also, finite element results indicated that the assumption of neglecting the sheet deformation effect for low intervals between consecutive spot welds is acceptable. However, it is necessary to consider sheet deformation for distance intervals more than 45 mm.
کلیدواژههای انگلیسی مقاله
Resistance spot weld,Three-sheet spot welded joint,Shunting,Electrical current density,Electrode displacement
نویسندگان مقاله
K. Reza Kashyzadeh |
Department of Transport, Academy of Engineering, Peoples’ Friendship University of Russia (RUDN University), 6 Miklukho-Maklaya Street, Moscow, Russian Federation
G. H. Farrahi |
School of Mechanical Engineering, Sharif University of Technology, Tehran, Iran
M. Minaei |
Materials Life Estimation and Improvement Laboratory, Sharif University of Technology, Tehran, Iran
R. Masajedi |
IKCO, Karaj Highway, Tehran, Iran
M. Gholamnia |
IKCO, Karaj Highway, Tehran, Iran
M. Shademani |
IKCO, Karaj Highway, Tehran, Iran
نشانی اینترنتی
https://www.ije.ir/article_141141_20211f71101fc439dd49411ca14f85e2.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات