این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Engineering، جلد ۳۵، شماره ۱، صفحات ۲۱-۲۸
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Synthesis and Characterization Unsaturated Polyester Resin Nanocomposites Reinforced by Fe2O3+ Ni Nanoparticles: Influence on Mechanical and Magnetic Properties
چکیده انگلیسی مقاله This investigation aims to study the effect of Fe2O3,Ni nanoparticles as a reinforcement materials on the mechanical properties of unsaturated polyester (UPR) as a matrix to produce a nanocomposite material using a casting route. Various examinations and tests were conducted to define the characteristics of the manufactured nanocomposite, such as Field Emission Scanning Electron Microscopy (FESEM), Energy Dispersive Spectrometry (EDS), and Fourier Transform Infrared Spectrometer (FTIR) analysis. The mechanical tests, including tensile, bending and hardness were performed on samples at the room temperature according to ASTM standards, while the magnetic characteristics were defined by vibrating sample magnetometer (VSM). Fe2O3 nanoparticles were incorporation into unsaturated polyester resin by different weight percentages that vary from 0 wt.% to 20 wt.% and a constant concentration 3 wt.% of Ni nanoparticles. The images of FESEM and EDS evinced the homogeneity of F2O3, Ni nanoparticles into the pure unsaturated polyester resin (UPR). While, the improvement in Young's modulus, tensile strength, bending strength, and hardness was compared with those for the UPR. The improvement was 10.02% in Young’s modulus, 44.08% in tensile strength, 13.55% in bending strength, and strength in hardness. Also, the magnetic properties, such as reidual magnetization (Mr), saturation magnetization (Ms) and coercivity force (Hc) enhanced with increasing the concentration of nanoparticles. The preferred percentage to improve the mechanical properties was found at 15 wt.% of Fe2O3 and then decreased above this concentration, whereas the enhancement in hardness was achieved at 20 wt. % of Fe2O3.
کلیدواژه‌های انگلیسی مقاله Fe2O3 nanoparticle,Ni nanoparticle,Microstructure,Mechanical properties,Magnetic properties,Nanocomposite
نویسندگان مقاله K. D. Salman |
Department of Electromechanical Engineering, University of Technology, Iraq

نشانی اینترنتی https://www.ije.ir/article_138927_b4e8dc10e95bcd31d06321473b3a568f.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات