این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Engineering، جلد ۳۴، شماره ۱۱، صفحات ۲۴۳۳-۲۴۴۱
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Design and Modeling of a High-Speed Permanent Magnet Synchronous Generator with a Retention Sleeve of Rotor
چکیده انگلیسی مقاله In this paper, the authors present a novel approach to design a high-speed permanent magnet synchronous generator (HS-PMSG) with a retention sleeve. The importance of the retention sleeve becomes conspicuous when the rotor suffers from the radial and tangential stresses derived from a high speed say 60 krpm. With respect to the mechanical property of Titanium, this material has been demonstrated that it could be a proper material for the retention sleeve. The investigations of this paper are concentrated on the electromagnetic coupled with mechanical design of a 2-poles, 18-slots, 40 KW HS-PMSG which is carried out through FEM analysis using JMAG 17.1 and ABAQUS CAE and optimized through the well-known Taguchi optimization method. The obtained results assure the robust mechanical behaviour of the HS-PMSG at a rotational speed of about 60 krpm meanwhile the cogging torque, the Joule loss, and the total weight of the optimally designed HS-PMSG are reduced 44.71%, 27.87%, and 2.78%, respectively compared with the initial design.
کلیدواژه‌های انگلیسی مقاله high-speed permanent synchronous machine,retention sleeve,Taguchi Optimization Method,Titanium sleeve
نویسندگان مقاله H. Parivar |
Department of Electrical Engineering, Shahrood University of Technology, Shahrood, Iran

A. Darabi |
Department of Electrical Engineering, Shahrood University of Technology, Shahrood, Iran

نشانی اینترنتی https://www.ije.ir/article_137604_d45f7d38d875b63a99143081fc2eac18.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات