این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Engineering، جلد ۳۴، شماره ۹، صفحات ۲۱۳۷-۲۱۴۷
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Numerical/Experimental Study on Downsized Iranian National Engine (EF7) Performance at Low Engine Speeds
چکیده انگلیسی مقاله Engine downsizing is a trusted method to reduce fuel consumption and pollution emitted from internal combustion engines. In this method, engine displacement volume is reduced while maintaining the same power/torque characteristics. However, there still exist several limitations to utilize this technology. In this paper, the naturally aspirated type of Iran national engine (EF7-NA) is investigated for a possible downsized version. A one-dimensional engine model equipped with a zero-dimensional two-zone combustion sub-model was developed and validated via experimental results for both natural aspirated and turbocharged engine types. Then experimental and numerical studies were carried out for the primary concept, deactivation of one cylinder besides using a turbocharger. To overcome the concept shortages, especially in lower ranges of engine speed, numerical studies were extended. Deployment of several turbochargers with different performance maps and different valve timing via a dual CVVT system were investigated. The results showed that there is a feasible method for EF7 engine downsizing via a 3-cylinder type equipped with a modified turbocharger and valve timing. The maximum difference between base-engine and downsized version torque is about 7% in low engine speeds.
کلیدواژه‌های انگلیسی مقاله Engine Downsizing,performance,3-Cylinder,Turbocharger,CVVT
نویسندگان مقاله M.M. Namar |
Faculty of Mechanical Engineering, Babol Noshirvani University of Technology, Babol, Iran

O. Jahanian |
Faculty of Mechanical Engineering, Babol Noshirvani University of Technology, Babol, Iran

R. Shafaghat |
Faculty of Mechanical Engineering, Babol Noshirvani University of Technology, Babol, Iran

K. Nikzadfar |
Faculty of Mechanical Engineering, Babol Noshirvani University of Technology, Babol, Iran; School of Mechanical, Aerospace and Automotive Engineering, Coventry University, Coventry, UK

نشانی اینترنتی https://www.ije.ir/article_134660_f7767654dd6f10bd0a7ed22a4cbccdd5.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات