این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Engineering، جلد ۳۴، شماره ۲، صفحات ۴۹۳-۴۹۹
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Hydroxyapatite Coating on Stainless Steel 316L using Flame Spray Technique
چکیده انگلیسی مقاله This study was a preliminary study on flame spray coating with hydroxyapatite (HAp). Coating is one of the technique to improve metal resistance to corrosion. In this study, flame spray coating using HAp was performed on stainless steel 316 L as a material for medical devices. This synthetic compound contains elements which are biocompatible and bioactive in human body where they can stick to body tissues or muscles.HAp has been extensively used as a bone substitute because of its crystal structure, biocompatibility and osteoconductive nature. In this study, 316L SS was coated by HAp using flame spray method with varied oxygen flowrate and air pressure. The result of this study showed that the air pressure of 1 bar and oxygen flowrate of 25 l/min had the thickest coating which was 123.5μm and the lowest corrosion rate which was 0.0261 mm/year. The air pressureof 3 bar and oxygen flowrate of 35 l/min produced the lowest thickness which was 32.5μm and the highest corrosion rate which was 0.0761 mm/year. The use of high air pressure and oxygen flowrate decreased the coating thickness and the corrosion rate. The result revealed that flame spray method was effective to be used to coat HAp on 316L SS.
کلیدواژه‌های انگلیسی مقاله coating,corrosion,Hydroxyapatite,Oxygen flowrate,Air pressure
نویسندگان مقاله F. Gapsari |
The Mechanical Engineering Department of Brawijaya University, Malang, Indonesia

N. A. Hidayatia |
The Mechanical Engineering Department of Brawijaya University, Malang, Indonesia

P. H. Setyarini |
The Mechanical Engineering Department of Brawijaya University, Malang, Indonesia

M P.N Alan |
The Mechanical Engineering Department of Brawijaya University, Malang, Indonesia

R. Subagyo |
MechanicalEngineering Department, University of Lambung Mangkurat, Banjarmasin, Indonesia

A. Andoko |
Mechanical Engineering Department, State University of Malang, Malang, Indonesia

نشانی اینترنتی https://www.ije.ir/article_124928_2572d6433a4dc2e58ec527f0528618ec.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات