این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Engineering، جلد ۳۴، شماره ۱، صفحات ۲۷۲-۲۸۲
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Fused Deposition Modeling of an Aircraft Wing using Industrial Robot with Non-linear Tool Path Generation
چکیده انگلیسی مقاله Fused Deposition Modelling (FDM) is an additive manufacturing process to build 3D objects on a horizontal plane from bottom to top. In the conventional FDM process, the printing of curved objects causes the staircase effect and results in poor surface finish. In this work, the FDM process integrated with a 6-DOF Industrial robot is used to print the curved objects by generating non-linear tool paths to avoid the staircase effect. A standard NACA 0015 aircraft wing having curved surfaces is printed without staircase effect at a uniform deposition rate using an industrial robot. The wing is sliced into concentric curved layers either in the form of convex or a concave shape. A new methodology is developed by combining the non-linear toolpaths with the change in extruder orientation to print curved objects at a uniform deposition without any staircase effect. ABB Robotstudio simulation software is used for simulating the printing process and simulation results are validated by printing the portion of the wing using the Industrial robot with an FDM extruder as an end effector. The experimental results showed that the aircraft wing is printed successfully with uniform deposition at constant velocity without any staircase effect.
کلیدواژه‌های انگلیسی مقاله Additive Manufacturing,Fused Deposition Modelling,Industrial Robot,Robotics,Three Dimensional Printing,Toolpath generation
نویسندگان مقاله A. Sri Harsha |
Department of Mechanical Engineering, Jawaharlal Nehru Technological University Anantapuramu, Ananthapur Dt., Andhra Pradesh, India

Ch R. Vikram Kumar |
Department of Mechanical Engineering, N.B.K.R.I.S.T., Vidyanagar, Nellore Dt., Andhra Pradesh, India

نشانی اینترنتی https://www.ije.ir/article_122176_afb6e98a1d5cb4aa7ea8d9d23e983785.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات