این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
یکشنبه 30 آذر 1404
International Journal of Engineering
، جلد ۳۳، شماره ۱۲، صفحات ۲۵۷۲-۲۵۷۷
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Simulation Study on Efficiency of Woven Matrix Wire and Tube Heat Exchanger
چکیده انگلیسی مقاله
Wire and tube heat exchanger has been utilized in refrigerators whose cooling performance depends on how much the wire are releasing heat. Wire efficiency is an important factor of the performance. The woven matrix is a new design of wire configuration on wire and tube heat exchanger. This research focused on optimization design of woven matix by varying wire pitch (p
w
5,7,9 mm) and three inlet massflows with controlling the hot fluid temperature at 353K. Computational Fluid Dynamic Simulation is used to determine heat transfer distribution of fluid in tube. The validation was conducted experimentally by measuring 9 temperature points at heat exchanger. This research revealed that p
w
7 mm with massflow rate 0.000571kg/s can decrease fluid temperature until it reaches 30
o
C with all wires working to release the heat and it results 74% wire efficiency. Then, p
w
9 mm with massflow 0.0011kg/s has 64% wire efficiency, it was because the heat exchanger cannot decrease the fluid temperature to 303K. At high massflow, heat exchanger need more wire to decrease the temperature down to 303K. This research is recommended for cooling system widely applied in food industry, an optimal cooling system will reduce the cost of electricity consumption for cooler.
کلیدواژههای انگلیسی مقاله
Woven Matrix Wire and Tube Heat Exchanger,Wire Pitch,Massflow Rate,Wire Efficiency,heat transfer,Temperature and Velocity Contour
نویسندگان مقاله
I. M. Arsana |
Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Surabaya, East Java, Indonesia
M. A. H. Rahardjo |
Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Surabaya, East Java, Indonesia
نشانی اینترنتی
https://www.ije.ir/article_120155_d01932e808536305dbf6ca0a97bd0bfd.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات