این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Engineering، جلد ۳۳، شماره ۸، صفحات ۱۵۹۰-۱۵۹۷
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی The Effect of Linear Change of Tube Diameter on Subcooled Flow Boiling and Critical Heat Flux
چکیده انگلیسی مقاله One of the major industry problems is the flow boiling, where reaching to the critical heat flux (CHF) condition can lead to a temperature jump and damage of the systems. In the present study, the effects of a uniform change in tube diameter on subcooled flow boiling and CHF was numerically investigated. The Euler-Euler model was used to investigate the relationship between the two liquid and vapor phases. The ANSYS Fluent code was used for simulation. According to the results, a linear increase in the tube diameter leads to increase of vapor volume fraction adjacent to the tube wall, as compared to a regular  tube with a fixed-diameter, which leads to increase of the tube wall temperature due to the low value of the heat transfer coefficient. At CHF conditions, where the tube wall temperature is much higher than that in subcooled flow boiling, an increase in tube diameter may lead to higher tube wall temperature before the temperature jump, as compared to the post-jump temperature of a tube with a constant diameter. The best approach for decreasing the tube wall temperature was found to be a linear decrease in tube diameter. For the tube diameter change angles of θ < - 0.0383°, tube wall temperature exhibited a decreasing trend from the inlet of the tube to its end.
کلیدواژه‌های انگلیسی مقاله Fluid Flow Boiling,Critical Heat Flux,Euler-Euler Model,Changing Diameter
نویسندگان مقاله K. DolatiAsl |
Department of Mechanical Engineering, University of Hormozgan, BandarAbbas, Iran

Y. Bakhshan |
Department of Mechanical Engineering, University of Hormozgan, BandarAbbas, Iran

E. Abedini |
Department of Mechanical Engineering, University of Hormozgan, BandarAbbas, Iran

S. Niazi |
Department of Mechanical Engineering, University of Hormozgan, BandarAbbas, Iran

نشانی اینترنتی https://www.ije.ir/article_108452_35220dfb36d6d596b9b926cebaa41191.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات