این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Chemical Engineering، جلد ۱۷، شماره ۳، صفحات ۲۴-۴۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Demuification of Water-in-Oil Emulsions by Means of Dielectrophoresis
چکیده انگلیسی مقاله In this work, the demulsification of water-in-crude oil emulsions by dielectrophoresis via applying a non-uniform electric field in a lab-scale cylindrical cell was studied. The stability of emulsions was assessed through monitoring the size distribution of water droplets at 0, 3, 6, and 24 hours after the preparation of emulsion. The effect of operating parameters including the temperature, demulsifier concentration, water salinity, and time on the demulsification of water was investigated. Sodium dodecyl sulfate and sodium chloride were used as demulsifier and salt respectively. The experiments were designed by the response surface methodology (RSM) based on the central composite design (CCD). The operating parameters including the voltage, temperature, demulsifier concentration, salinity of water, and separation time were optimized. The contours and 3-D response surfaces of the water separation were acquired. A quadratic polynomial model, which was statistically highly significant (R2=0.9950, n=32), was provided by the RSM to predict the amount of the separated water. Comparison among the experimental and RSM-optimized values indicates a good agreement. The optimum amount of the water separation was obtained at the voltage of 15 kV, temperature of 60 °C, demulsifier concentration of 123 ppm, salinity of water of 12260 ppm, and separation time of 12.4 minutes. Under such conditions, the separation of water reached 98 %. The results obviously show that the electric field can be used as an appropriate means for the breakage of W/O emulsions.
کلیدواژه‌های انگلیسی مقاله Dielectrophoresis,Water-in-Oil Emulsion,electric field,Response Surface Methodology
نویسندگان مقاله M. Mozafari |
Department of Chemical Engineering, Iran University of Science and Technology, Narmak, Tehran 16846-13114, Iran

A. Ganjizade |
Department of Chemical Engineering, Iran University of Science and Technology, Narmak, Tehran 16846-13114, Iran

.S. N. Ashrafizadeh |
Iran University of Science and Technology

نشانی اینترنتی https://www.ijche.com/article_132311_611a9c4da051be022cf7518112c66582.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات