این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Chemical Engineering، جلد ۱۷، شماره ۲، صفحات ۷۰-۸۷
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Increasing flow capacity and reducing drag in microtubes using drag-reducing polymer
چکیده انگلیسی مقاله Decreasing pressure losses in microtubes is an important subject, especially when increase in flow capacity is required. In the same pumping power, decreasing the pressure drops is coincides with increasing the fluid flow rate passing through a microtube. The current study aims to examine how the water pressure drop across a microtube can be affected by the addition of small concentrations of different drag-reducing polymeric agents. A kind of laminarization behaviour was found by the addition of the selected polymer to the turbulent flow. The effect of concentration of drag-reducing agent (DRA) on observed viscosity and drag values are reported. Moreover, the effects of different types of drag-reducing agents on friction factor are obtained at the best concentration in the range of examined concentrations. Under this condition amount of drag reduction percentage and increase in capacity of the flow were respectively 33% and 36%. The obtained results show that more drag reduction occurs at a higher flow rate for 20ppm of high molecular weight polyacrylamide.
کلیدواژه‌های انگلیسی مقاله Drag Reduction,drag reducing polymer,microtube,increased capacity,Turbulent Flow
نویسندگان مقاله M.H. Akbari |
Razi University

M. Rahimi |
Razi University

H.R. Karami |
Razi University

نشانی اینترنتی https://www.ijche.com/article_119585_642f06d8a0ee49f2093164595307999a.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات