این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Chemistry and Chemical Engineering، جلد ۴۲، شماره ۶، صفحات ۱۸۸۹-۱۸۹۹
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Reuse of Sanitary Ceramic Waste in the Production of Vitreous China Bodies
چکیده انگلیسی مقاله An experimental investigation of Sanitary Ceramic Waste (SCW) for use as raw material in the manufacture of vitreous china bodies is presented. The gradual substitution of feldspar by sanitary ceramic waste and its effects on the technical and physical properties of sanitary bodies have been studied. The rheological behavior of sanitary slip is improved using Na-electrolyte. The characterization of the fired vitreous bodies at 1230 ◦C shows that 10 wt. % SCW substitution is the ideal value for the composition of a vitreous china body.  FTIR and DRX analyses confirmed that the crystalline phases (quartz and mullite) are stable during the addition of sanitary ceramic waste with a significant increase in their intensities. SEM micrographs show an increase in the porosity when the addition of sanitary ceramic waste exceeds 10wt. %, as a result of the reduction of the vitrified phase. From physical-mechanical characterization, an improvement in flexural strength (33 to 41MPa), and a reduction in water absorption (0.36 to 0.31 %) were recorded. These positive results open very promising prospects for the valorization of sanitary ceramic waste, with many technical, economic, and environmental benefits.
کلیدواژه‌های انگلیسی مقاله SCW,physical properties,Flexural Strength,vitreous china bodies
نویسندگان مقاله Boulaiche Khaled |
Laboratory of Applied Energetics and Materials (LEAM), Faculty of Sciences and Technology, Process Engineering Department, University of Mohammed Seddik Ben Yahia, Jijel (18000), ALGERIA

Kamel Boudeghdegh |
Laboratory of Applied Energetics and Materials (LEAM), Faculty of Sciences and Technology, Process Engineering Department, University of Mohammed Seddik Ben Yahia, Jijel (18000), ALGERIA

Roula Abdelmalek |
Laboratory of Interactions Material-Environment (LIME), Faculty of Sciences and Technology, Process Engineering Department, University of Mohammed Seddik Ben Yahia, Jijel (18000), ALGERIA

Alioui Hichem |
Laboratory of Civil Engineering and Environment (LCEE), Faculty of Sciences and Technology, Civil Engineering Department, University of Mohammed Seddik Ben Yahia, Jijel (18000), ALGERIA

Mammeri Oussama |
Laboratory of Interactions Material-Environment (LIME), Faculty of Sciences and Technology, Process Engineering Department, University of Mohammed Seddik Ben Yahia, Jijel (18000), ALGERIA

نشانی اینترنتی https://ijcce.ac.ir/article_696934_9cb122b721149c6e0ceae059bedafc37.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات