این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Chemistry and Chemical Engineering، جلد ۴۲، شماره ۵، صفحات ۱۴۹۱-۱۴۹۸
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Epoxidation of Unsaturated Oleic Acids via in Situ Catalytic Performic Acid
چکیده انگلیسی مقاله Studies on the epoxidation of fatty acids have garnered much interest in recent years due to the rising demand for eco-friendly epoxides derived from vegetable oils. This study aims to optimize the process parameters of epoxidation of palm oleic acid via an in situ peracid mechanism with an applied homogenous catalyst. Oleic acid was epoxidized using performic acid generated in situ through the reaction between hydrogen peroxide and formic acid when sulfuric acid was applied as a catalyst. The optimum reaction condition of epoxide was at the temperature of 45°C, the molar ratio of formic acid to oleic acid at 1.64:1 and the molar ratio of hydrogen peroxide to oleic acid at 2:1. Lastly, a mathematical model was developed using the numerical Runge Kutta- 4th Order method. In the model, the method was applied with a genetic algorithm optimization to determine the process model that fit the experimental data using MATLAB software. After 100 iterations, the reaction rate constant for epoxidized oleic acid production was:  k11 = 1.9305 L/mol. min, k12 =15.2284 L/mol. min, k21 = 0.0570 L/mol. min, k31 = 0.0106 L/mol. min. Overall, epoxidized oleic acid was successfully produced by in situ performic acid mechanism with 80% relative conversion to oxirane. 
کلیدواژه‌های انگلیسی مقاله Epoxidation,oxirane content,Optimization,Kinetic study,Hydrolysis,oleic acid,Performic acid
نویسندگان مقاله Danial Nuruddin Azlan Raofuddin |
School of Chemical Engineering, Universiti Teknologi MARA Cawangan Johor, Kampus Pasir Gudang, 81750 Masai, Johor, MALAYSIA

Nurul Hasna Asniera Rasnan |
School of Chemical Engineering, Universiti Teknologi MARA Cawangan Johor, Kampus Pasir Gudang, 81750 Masai, Johor, MALAYSIA

Intan Suhada Azmi |
Centre for Chemical Engineering Studies, Universiti Teknologi MARA Cawangan Pulau Pinang, Kampus Permatang Pauh, 13500 Permatang Pauh, Pulau Pinang, MALAYSIA

Siti Mariam A. Rahman |
MM Biomass Global (M) Sdn. Bhd, MALAYSIA

Mohamad Zarqani Yeop |
Centre for Chemical Engineering Studies, Universiti Teknologi MARA Cawangan Pulau Pinang, Kampus Permatang Pauh, 13500 Permatang Pauh, Pulau Pinang, MALAYSIA

Mohd Zulkpli Ab Kadir Ab Kadir |
School of Chemical Engineering, Universiti Teknologi MARA Cawangan Johor, Kampus Pasir Gudang, 81750 Masai, Johor, MALAYSIA

Mohd Jumain Jalil |
School of Chemical Engineering, Universiti Teknologi MARA Cawangan Johor, Kampus Pasir Gudang, 81750 Masai, Johor, MALAYSIA

نشانی اینترنتی https://ijcce.ac.ir/article_696743_f56280cc030c35172e1e25dd4c9301b7.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات