این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Chemistry and Chemical Engineering، جلد ۴۱، شماره ۱۱، صفحات ۳۸۰۵-۳۸۱۲
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Effect of Membrane Support Thickness on Supported Liquid Membrane Extraction of Levulinic Acid
چکیده انگلیسی مقاله One of the most appealing compounds in biomass products is levulinic acid (LA). At the same time, separating LA from biomass products is a significant issue in LA production. Supported liquid membrane (SLM) is a revolutionary technique for separating LA from biomass. This study studied the effect of different casting thicknesses of hybrid polyethersulfone graphene membrane from 300 µm to 450 µm on the membrane characteristic and extraction yield of LA via the SLM process. The liquid membrane impregnated into the membrane support was made of 0.3 M trioctylamine and 2-ethyl-1-hexanol. The morphology, surface contact angles, porosity, tensile strength, and performance of the support membrane were evaluated. The membrane cast at 400 µm extracted the most LA (86%) from the 10 g/L LA feed phase. It had an average porosity of 57.77%, surface contact angle at the top layer of 81.21°, surface contact angle at the bottom layer of 98.02°, and tensile strength of 8.41 N. The membrane casting thickness impacts the character of the membrane support and the overall performance of SLM. A suitable membrane structure is required to overcome the instability of the liquid membrane and increase the lifetime operation of SLM.
کلیدواژه‌های انگلیسی مقاله Supported liquid membrane,PES/graphene membrane,casting thickness,levulinic acid,Graphene
نویسندگان مقاله Syed M. Saufi |
Department of Chemical Engineering, College of Engineering, Universiti Malaysia Pahang, Lebuhraya Tun Razak, 26300 Gambang, Pahang Darul Makmur, MALAYSIA

Vikneswary Rajendaren |
Department of Chemical Engineering, College of Engineering, Universiti Malaysia Pahang, Lebuhraya Tun Razak, 26300 Gambang, Pahang Darul Makmur, MALAYSIA

M. A. Khushairi M. Zahari |
Faculty of Chemical and Process Engineering Technology, Universiti Malaysia Pahang, Lebuhraya Tun Razak, 26300 Gambang, Pahang Darul Makmur, MALAYSIA

نشانی اینترنتی https://ijcce.ac.ir/article_248955_3d130ea521cdc5109bffd5a52297e80f.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات