این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Chemistry and Chemical Engineering، جلد ۴۱، شماره ۱۱، صفحات ۳۹۰۸-۳۹۱۷
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Evaluation of the Combustion and Emission Parameters of Waste Transformer Oil and Its Diesel Blends
چکیده انگلیسی مقاله The production of fuel from Waste Transformer Oil (WTO) is an excellent way to produce alternative fuels. The aim of research in this paper is to obtain fuel by mixing WTO with diesel fuel in different mass ratios that can be used as an alternative fuel for low-power heat generators as well as for internal combustion engines. Waste oils are a serious problem for the environment due to their disposal, and are considered useful energy sources for their high calorific value. Taking these facts into account, research was conducted to evaluate the combustion and emission parameters in a boiler furnace of 40 kW using waste transformer oil (WTO) and its four diesel blends by varying WTO mass fractions from 20% to 50%. The results were analyzed and compared with diesel fuel. An increase of NO, CO, CO2 emissions were observed for WTO and its diesel blends and compared to diesel. The flue gas temperature in the kiln is high for the WTO, which indicates the efficiency of the input energy. During the flue gas purification in a gas washing bottle, concentrates of sulfate, sulfide, nitrate, and nitrite were recorded.
کلیدواژه‌های انگلیسی مقاله Diesel Fuel,Emission,waste transformer oil,parameters,combustion
نویسندگان مقاله Dragiša Đorđić |
Faculty of Ecology, Independent University of Banja Luka, 12 e Veljka Mlađenovića, 78000 Banja Luka, BOSNIA AND HERZEGOVINA

Slavko Đurić |
Faculty of Transport and Traffic Engineering, University of East Sarajevo, 52 Vojvode Mišića, 74000 Doboj, BOSNIA AND HERZEGOVINA

Milan Milotić |
Department of Transport Engineering, Faculty of Transport and Traffic Engineering, University of East Sarajevo, Doboj, BOSNIA AND HERZEGOVINA

Žarko Bojić |
Faculty of Technical Sciences, University of Novi Sad, 6 Dositeja Obradovića Square, 21000 Novi Sad, SERBIA

نشانی اینترنتی https://ijcce.ac.ir/article_249129_76f3d70c7d96cc0f2b0a26c2c3f0016d.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات