این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
چهارشنبه 26 آذر 1404
Iranian Journal of Chemistry and Chemical Engineering
، جلد ۴۰، شماره ۴، صفحات ۱۲۷۷-۱۲۸۸
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Improving Cracking Severity in an Ethane Thermal Cracker Based on Dynamic Optimization Considering Process Limitations
چکیده انگلیسی مقاله
The main goal of this research is to improve cracking severity in an industrial ethane thermal cracker in a domestic plant. In the first step, the considered cracker is modeled based on the mass and energy balance equations considering a molecular kinetic model. To develop an accurate model, a detailed thermal model is adopted to predict the tube skin temperature. To prove the accuracy of the developed model and considered assumptions, the simulation results are compared with the available plant data. In the next step,
a sensitivity analysis is performed to investigate the effects of coil outlet temperature and steam to ethane ratio on the cracking severity factors including ethane conversion and production rate. Based on the results of sensitivity analysis although increasing steam to ethane ratio decreases ethane conversion, it improves ethylene yield. Then
, a dynamic optimization problem is formulated to maximize ethylene production and minimize production decay during the process run time considering feed temperature, furnace temperature, and steam to ethane ratio as decision variables. The results show that applying the optimal condition to the system improves ethylene production by about 9.44%.
کلیدواژههای انگلیسی مقاله
Ethane cracking,Molecular reaction network,Process Modeling,Dynamic Optimization
نویسندگان مقاله
S. Razani |
Department of Chemical Engineering, School of Chemical and Petroleum Engineering, Shiraz University, Shiraz, I.R. IRAN
Mohammad Farsi |
Department of Chemical Engineering, School of Chemical and Petroleum Engineering, Shiraz University, Shiraz, I.R. IRAN
Mohammad Reza Rahimpour |
Department of Chemical Engineering, School of Chemical and Petroleum Engineering, Shiraz University, Shiraz, I.R. IRAN
A. Bolhassani |
Jam Research and Development Center, Jam Petrochemical Complex, Bushehr, I.R. IRAN
نشانی اینترنتی
https://ijcce.ac.ir/article_239401_d85216d90c67ae4660eb1581b9e939e7.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات