این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Mechanical Engineering Transactions of the ISME، جلد ۲۳، شماره ۲، صفحات ۸۰-۱۰۴
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی A New Modified Harmony Search Optimization Algorithm for Evaluating Airfoil Shape Parameterization Methods and Aerodynamic Optimization
چکیده انگلیسی مقاله In this work, a modification has been made to increase the efficiency and convergence of the harmony search algorithm. Then, the capability of this amendment was investigated by applying it to the following aerodynamic problems for the first time. First, the methods of airfoil shape parametrization (Bezier curves, Parsec method, and NACA 4-digit airfoil) were investigated using an inverse optimization design by the present modified harmony search optimization algorithm. Then, inverse and direct optimization of an airfoil were carried out by the modified algorithm. Aerodynamic analysis of the problem was obtained using compressible Reynolds-Averaged Navier-Stokes (RANS) equations along with the Spalart-Allmaras turbulence model. Results showed that the Bezier curves and the Parsec method have higher flexibility than the NACA 4-digit airfoil. The Parsec method was introduced as the best approach, because of fewer control parameters. The inverse optimization results showed that the present airfoil shape optimization set can obtain the target shape with high accuracy. The Direct optimization with a maximum lift to drag ratio target function revealed that the shock waves significantly weaken at the optimum airfoil. Generally, the results obtained verify that using the modified harmony search algorithm together with the Parsec method provides a powerful tool for direct and inverse aerodynamic optimization.
کلیدواژه‌های انگلیسی مقاله Inverse optimization design,Direct optimization,Meta-heuristic optimization
نویسندگان مقاله F. Jalili |
M.Sc. Student, University of Birjand, Birjand, South Khorasan, 9718776391, Iran

S. M. MalekJafarian |
Corresponding Author, Associate Professor, Department of Mechanical Engineering, University of Birjand, Birjand, South Khorasan, 97175/615, Iran, mmjafarian@birjand.ac.ir

A. Safavinejad |
Associate Professor, Department of Mechanical Engineering, University of Birjand, Birjand, South Khorasan, 97175/615, Iran

H. Masoumi |
M.Sc. Student, University of Birjand, Birjand, South Khorasan, 9718776391, Iran

نشانی اینترنتی https://jmee.isme.ir/article_255119_237c6c239f54853bbd8f1eaa16e556b9.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات