این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
شنبه 22 آذر 1404
Iranian Journal of Mechanical Engineering Transactions of the ISME
، جلد ۲۲، شماره ۱، صفحات ۲۷-۴۱
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Investigation of welding parameters effects on residual stresses of resistance spot welding of AZ31 alloy
چکیده انگلیسی مقاله
Due to the growing utilize of lightweight materials and the wide use of resistance spot welding in the several industries, in this study was investigated the effect of welding parameters on residual stresses of resistance spot welding of AZ31 magnesium alloy. Resistance spot welding is a complicated multi-regime phenomenon which simulated by a developed electro-thermo-mechanical coupled finite element model. The importance of the parameters interactions was determined by using design of experiment method (DOE). The FE model used to predict temperature changes, nugget growth, and the residual stresses distribution. For validation, the results of the simulation were compared with experimental data, based on the nugget diameter at the direct current (DC) and alternating current (AC) conditions. The results showed that by increasing current and welding time the residual stresses are reduced. Increasing electrode force causes to increase residual stress but increasing holding time causes to create a peak in the amount of residual stresses. Also, evaluation of current sources revealed, in the same conditions, using direct current creates less residual stress than alternating current.
کلیدواژههای انگلیسی مقاله
Resistance spot welding,Residual Stress,DOE,FE model,Magnesium alloy
نویسندگان مقاله
F. Nazari |
Corresponding Author, PhD of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran
M. Sedighi |
Professor, Department of PMechanical Engineering, Iran University of Science and Technology, Tehran, Iran
D. Afshari |
Assistant Professor, Department of Mechanical Engineering, University of Zanjan, Zanjan, Iran
نشانی اینترنتی
https://jmee.isme.ir/article_241948_2aa6c512886bb771f69a6e880c2e8ba1.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات