این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Aerospace Science and Technology، جلد ۱۶، شماره ۱، صفحات ۳۱-۴۷
عنوان فارسی Darrieus Wind Turbine; Performance Enhancement Due to the Blade Cross-Section Optimization
چکیده فارسی مقاله This research investigates the effect of optimization of blade cross-section on the performance of the Darrieus wind turbine. The fluid flow around a Darrieus wind turbine is simulated by URANS (Unsteady Reynolds Averaged Navier Stokes) method. And blade cross-section was modeled by the Bezier curve and optimized to increase the average torque of the wind turbine. We used a novel, simple way for remeshing new design points in the optimization process. The Nelder-Mead simplex method was used for optimization, which enhanced the Turbine's performance by 33.7 percent. Results show that optimization of the blade cross-section is effective for increasing the performance of a VAWT (Vertical Axis Wind Turbine), and Nelder-Mead simplex is a proper and fast optimization method to be used in this case. Finally, the optimized airfoil was analyzed and compared with the initial one to understand optimization effects. It was concluded that optimization was more effective in azimuth positions of 90 to 160 degrees. And it decreased the performance in some regions according to changing nature of flow around each blade because of rotational motion. Analyzes show that optimization increased the Turbine's performance by increasing lift force of airfoil in some positions or affecting interaction flow -even accompanied by decreasing lift force of airfoil- in other positions, and it decreased performance in some other azimuth points.
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Darrieus Wind Turbine; Performance Enhancement Due to the Blade Cross-Section Optimization
چکیده انگلیسی مقاله This research investigates the effect of optimization of blade cross-section on the performance of the Darrieus wind turbine. The fluid flow around a Darrieus wind turbine is simulated by URANS (Unsteady Reynolds Averaged Navier Stokes) method. And blade cross-section was modeled by the Bezier curve and optimized to increase the average torque of the wind turbine. We used a novel, simple way for remeshing new design points in the optimization process. The Nelder-Mead simplex method was used for optimization, which enhanced the Turbine's performance by 33.7 percent. Results show that optimization of the blade cross-section is effective for increasing the performance of a VAWT (Vertical Axis Wind Turbine), and Nelder-Mead simplex is a proper and fast optimization method to be used in this case. Finally, the optimized airfoil was analyzed and compared with the initial one to understand optimization effects. It was concluded that optimization was more effective in azimuth positions of 90 to 160 degrees. And it decreased the performance in some regions according to changing nature of flow around each blade because of rotational motion. Analyzes show that optimization increased the Turbine's performance by increasing lift force of airfoil in some positions or affecting interaction flow -even accompanied by decreasing lift force of airfoil- in other positions, and it decreased performance in some other azimuth points.
کلیدواژه‌های انگلیسی مقاله VAWT,aerodynamic optimization,Simplex,Bezier Curve
نویسندگان مقاله Jafar Jafari |
Malek-Ashtar University, Tehran, Iran

Hamid Parhizkar |
Malek Ashtar University, Tehran, Iran

Sajad Ghasemlooy |
Malek Ashtar University, Tehran, Iran

نشانی اینترنتی https://jast.ias.ir/article_167453_58d185478719c42e7ab72634589b7510.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات