این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Aerospace Science and Technology، جلد ۱۵، شماره ۲، صفحات ۱۱۹-۱۳۴
عنوان فارسی Numerical Investigation of Aerodynamic Performance of Planar/grid Stabilizer wings at Downstream Control Surface in Transonic Flow Regime
چکیده فارسی مقاله In multi-stage Missiles, stabilizer wings are responsible for stabilizing the Missile. The control fins located upstream of the stabilizer wings affect the flow by spinning, which influences stability as well as control. One method for resolving this problem is to design stabilizer wings with less affectability against the upstream flow. The present paper deals with this issue by considering multiple planar fins and grid fins. Once validation is performed, after selecting the appropriate turbulence model and choosing the planar and grid fins, the appropriate Missile model is established; then, on a model with speeds of 0.6, 0.7, and 0.8 Mach, at attack angles of 0, 2, 4, and 6 degrees, and with control fins, variation at angles of 0, 1, 3, and 6 degrees, the aerodynamic coefficients as well as the effects of the upstream stabilizer wings are investigated in pitch and roll modes at an appropriate trim angle . The obtained results indicated that the use of grid fin downstream of the control surfaces would be less affected due to its physical nature; thus, the lower capacity of the control surface would be used for control during the flight, which would significantly facilitate the process of designing.
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Numerical Investigation of Aerodynamic Performance of Planar/grid Stabilizer wings at Downstream Control Surface in Transonic Flow Regime
چکیده انگلیسی مقاله In multi-stage Missiles, stabilizer wings are responsible for stabilizing the Missile. The control fins located upstream of the stabilizer wings affect the flow by spinning, which influences stability as well as control. One method for resolving this problem is to design stabilizer wings with less affectability against the upstream flow. The present paper deals with this issue by considering multiple planar fins and grid fins. Once validation is performed, after selecting the appropriate turbulence model and choosing the planar and grid fins, the appropriate Missile model is established; then, on a model with speeds of 0.6, 0.7, and 0.8 Mach, at attack angles of 0, 2, 4, and 6 degrees, and with control fins, variation at angles of 0, 1, 3, and 6 degrees, the aerodynamic coefficients as well as the effects of the upstream stabilizer wings are investigated in pitch and roll modes at an appropriate trim angle . The obtained results indicated that the use of grid fin downstream of the control surfaces would be less affected due to its physical nature; thus, the lower capacity of the control surface would be used for control during the flight, which would significantly facilitate the process of designing.
کلیدواژه‌های انگلیسی مقاله Grid fin,Inductive roll,aerodynamic coefficient,Static margin,Pitch
نویسندگان مقاله Mahdi Miralam |
Department of Mechanical Engineering, Shahid Rajaee teacher training University, Tehran

Amir Rahni |
Department of Aerospace Engineering, Amirkabir University of Technology, Tehran, Iran

نشانی اینترنتی https://jast.ias.ir/article_154722_a50b85ba891da69de7cfe2367547528e.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات