این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Aerospace Science and Technology، جلد ۱۴، شماره ۱، صفحات ۱-۱۰

عنوان فارسی Investigation of fin changes effects on aerodynamic performance of airship
چکیده فارسی مقاله Airships usually have low cruising speed due to their large volume and high drag level. This makes the aerodynamic design of the vehicle, including the surfaces shape, the length-to-diameter ratio and the position of the fins, all very important. Furthermore, an important parameter in the vehicle aerodynamic drag is determining the flow separation area at the rear of the air vehicle. The flow separation plays an essential role in the amount of drag and lift force, so the location of the fins and the design of the rear of the airship will be very important. By using both analytical and numerical methods, this study examines the aerodynamic efficiency of an airship in three different configurations, focusing on the location, type, and angle of attack of the fin, and compares analytical and numerical results. According to studies conducted among the types of fins, the cross-type will have the best performance among the fins in terms of lift-drag ratio. Also, moving the fins forward and distancing them from the rear of the vehicle disrupts the flow pattern at the rear of the vehicle and delays separation. This will improve aerodynamic efficiency and improve the lift-drag ratio of the vehicle.
کلیدواژه‌های فارسی مقاله

عنوان انگلیسی Investigation of fin changes effects on aerodynamic performance of airship
چکیده انگلیسی مقاله Airships usually have low cruising speed due to their large volume and high drag level. This makes the aerodynamic design of the vehicle, including the surfaces shape, the length-to-diameter ratio and the position of the fins, all very important. Furthermore, an important parameter in the vehicle aerodynamic drag is determining the flow separation area at the rear of the air vehicle. The flow separation plays an essential role in the amount of drag and lift force, so the location of the fins and the design of the rear of the airship will be very important. By using both analytical and numerical methods, this study examines the aerodynamic efficiency of an airship in three different configurations, focusing on the location, type, and angle of attack of the fin, and compares analytical and numerical results. According to studies conducted among the types of fins, the cross-type will have the best performance among the fins in terms of lift-drag ratio. Also, moving the fins forward and distancing them from the rear of the vehicle disrupts the flow pattern at the rear of the vehicle and delays separation. This will improve aerodynamic efficiency and improve the lift-drag ratio of the vehicle.
کلیدواژه‌های انگلیسی مقاله Airship,Aerodynamic,Aerodynamic configuration

نویسندگان مقاله Sahar Noori |
Faculty of Aerospace engineering Amirkabir University

Mohamad Saleh Afshar |
Aerospace Research Institute

Nima Karimi |
Iranian Space Research Center


نشانی اینترنتی https://jast.ias.ir/article_133173_f6bc8cbd912ac6b185bfb2259a0bd882.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات