این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
پنجشنبه 20 آذر 1404
Journal of gas Technology
، جلد ۵، شماره ۱، صفحات ۵۷-۶۹
عنوان فارسی
کاربرد دینامیک سیالات محاسباتی به منظور عیب یابی و تحلیل رفتار هیدرودینامیکی در یک جداکننده گرانشی سه فازه صنعتی
چکیده فارسی مقاله
جدایش جریان چند فازی در جداکنندههای گرانشی یکی از فرایند های مهم در صنایع مختلف به شمار میرود. در این مطالعه از یک شبیه سازی دینامیک سیالات محاسباتی (CFD) با استفاده از یک مدل ترکیبی VOF-DPM برای عیبیابی و تحلیل رفتار هیدرودینامیکی فرایند جدایش در یک جداکننده سه فازی صنعتی دارای بوت، استفاده شده است. لازم به ذکر است که با وجود کاربرد گسترده جداکنندههای بوت در صنایع مختلف تاکنون هیچ پژوهشی روی این نوع از جداسازها برای بررسی رفتار ماکروسکوپی و میکروسکوپی فرایند جدایش ارائه نشده است. در این پژوهش، نتایج محاسبات عددی بر حسب پروفایلهای جریان سه فازی، رفتار فازهای ثانویه، بازده جداکننده و توزیع اندازه قطرات مورد بررسی قرار گرفته است. نتایج نشان داد که مدل CFD مورد نظر قادر به تخمین خوبی از رفتار جدایش در یک جداکننده سه فاز دارای بوت است. عیب یابی فرایند جدایش در جداکننده مورد نظر برای تشخیص پارامترهایی که منجر به کاهش راندمان جداکننده میشود نیز مورد بررسی قرار گرفته است. نتایج نشان دهنده کاربرد نامناسب نوع هدایت کننده ورودی، نیاز به وجود نم گیر مناسب در خروجی گاز و همچنین نیاز به یک گرداب شکن در خروجی مایع بوده است. اثر افزایش میزان دبی آب ورودی روی عملکرد جداساز، یکی از پارامترهای مهم دیگری است که در این مطالعه مورد بررسی قرار گرفته است. نتایج نشان داد که افزایش دبی آب ورودی در محدوده kg/hr 11823-47295 منجر به افزایش میزان جرم آب در خروجی گاز از 0/90 به kg/hr 1/6 شده است ولی این مقدار افزایش باعث کاهش چشمگیری در عملکرد جدایش در جداساز مورد نظر نشده است.
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Application of CFD for Troubleshooting and Hydrodynamic Analysis in an Industrial Three-Phase Gravity Separator
چکیده انگلیسی مقاله
Multiphase separation in gravity separators is one of the important processes in different industries. This study presents a computational fluid dynamics (CFD) simulation of an industrial three-phase boot separator applying a coupled volume of fluid (VOF)- dispersed phase model (DPM) method for hydrodynamic analysis and troubleshooting of the separation process. Noted that despite the wide application of the boot separator in different industries, no research has been performed on this type of separator to investigate the macroscopic and microscopic behavior of the separation process. The results of numerical calculations based on three-phase flow profile, secondary phase behavior, separator performance, and size distribution of the droplets were investigated in this research. Results showed that the CFD model is well capable of estimating the separation behavior in a three-phase boot separator. Troubleshooting of the studied separator was also investigated to detect the parameters that might decrease the separation performance. Based on the results, it is concluded that the separator suffers from the type of the inlet diverter, lack of an efficient mist extractor at the gas outlet and also lack of an appropriate vortex breaker at the oil outlet. The effect of increasing the inlet water flow rate on the separator performance was another parameter that was studied in this research. Results demonstrated that increasing the inlet water flow rate from 11823-47295 kg/hr caused an increase in the mass of droplets at the gas outlet from 0.09 to 1.6 kg/hr, but this increase did not lead to a significant decrease in the separation efficiency.
کلیدواژههای انگلیسی مقاله
Three phase gravity separator,Volume of fluid,Dispersed phase model,Troubleshooting,Hydrodynamic analysis
نویسندگان مقاله
Zohreh Khalifat |
Ph.D student, Chem. Eng. Dept., Faculty of Eng., University of Sistan and Baluchestan, Zahedan, Iran
Mortaza Zivdar |
Corresponding Author: Chem. Eng. Dept., Faculty of Eng., University of Sistan and Baluchestan, Zahedan, Iran
Rahbar Rahimi |
Department of Chemical Engineering University of Sistan and Baluchestan, Zahedan, Iran
نشانی اینترنتی
https://www.jgt.irangi.org/article_251661_78dd41ce0268e9216d0dc706f66cef8c.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات