این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Theoretical and Applied Vibration and Acoustics، جلد ۷، شماره ۱، صفحات ۷۲-۸۷
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Investigation of dynamic-thermal stress intensity factor in functionally-graded plates having an edge crack
چکیده انگلیسی مقاله Functionally graded materials (FGMs) are non-homogeneous materials whose properties gradually vary as a function of coordinates. Recently, due to the possibility of applying FGMs in conditions with severe temperature changes, e.g., nuclear reactors, chemical power plants, and space crafts, the interest in investigations on this type of material has increased considerably. Usually, FGMs are designed to tolerate drastic temperature changes and thermal shocks are mainly associated with thermal stresses. Therefore, the occurrence of thermal fracture in FGMs is probable. Consequently, studying the fracture mechanics of this type of material under extreme thermal shocks and dynamic loads has become crucial. This paper studies the first mode stress intensity factor (SIF) in FGM plates with an edge crack under thermal shock and dynamic loading. The plates consist of Nickel (metal) and Zirconia (ceramic) properties on top and bottom, respectively. The finite element method is employed to perform dynamic thermal analyses of the plates. Having known that variations in the amount of metal and ceramic used in producing an FGM plate can change its behavior, different gradients of material properties are applied for modeling the FGM plates. Then, the effects of the variation of the gradients on the dynamic-thermal SIF under thermal shocks and dynamic loadings are examined. One of the novelties of the present study is modeling the required material properties for thermal analyses (heat transfer coefficient, specific heat, and thermal expansion coefficient) and dynamic analyses (elasticity modulus, Poisson's ratio, and density) as functions, which have been rarely considered simultaneously in the previous studies.
کلیدواژه‌های انگلیسی مقاله Functionally-Graded Material,Edge Crack,Dynamic-Thermal Stress Intensity Factor,finite element method
نویسندگان مقاله Safa Peyman |
Assistant Professor, Department of Structural Engineering, Imam Hossein University, Tehran, Iran

Amir Eskandari |
Ph.D. Student, School of Civil Engineering, Iran University of Science and Technology, Narmak, Tehran, Iran

نشانی اینترنتی https://tava.isav.ir/article_702301_6195ae4e6da800f89c73de6ea16709ec.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات