این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Theoretical and Applied Vibration and Acoustics، جلد ۶، شماره ۱، صفحات ۱۷-۳۴
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Evaluation of cantilever plates in the spinning situation: time histories and modal characteristics
چکیده انگلیسی مقاله A study on the dynamics of cantilever orthotropic plates under spinning conditions is presented in this article. The governing equations of motions are containing the centrifugal and Coriolis effects. Two approximation methods, the extended Galerkin method, and extended Kantorovich method, are utilized for the investigation of the mathematical model. The verification of the obtained results is conducted by comparing two methods that show good agreement. This
investigation is concentrated on the time histories and the natural frequencies of the system. First, using time responses, the effects of different types and numbers of admissible functions used in the approximate solution are discussed.
Next, the results are obtained to explore the impact of dimensionless parameters like material, hub radius ratio, stagger angle, etc. on the modal characteristics of the spinning structures. The results of the simulations exhibit the importance of the proper choice of both type and number for trial functions. Furthermore, the selection of orthogonal functions can be vital to guarantee the convergence speed of an approximate solution. Further discussion on the modal characteristic reveals that in different stiffness ratios of the plate, the centrifugal stiffening rate caused by spinning motion is affected by rotational speed. Moreover, this stiffening rate is depended on setting angle and hub radius ratio. Finally, the last part of the paper is devoted to the forced  response analysis of the rotating plate
کلیدواژه‌های انگلیسی مقاله Rotating blade,Cantilever plates,Orthotropic plates,Modal characteristics,System response
نویسندگان مقاله Hamidreza Rostami |
PhD, Department of Ocean Engineering, Amirkabir University of Technology, Tehran, Iran

Firooz Bakhtiari-Nejad |
Professor, Department of Mechanical Engineering, University of Maryland at Baltimore County, USA & Department of Mechanical Engineering, Amirkabir University of Technology, Tehran, Iran

Amirhossein Modarres-Aval |
PhD Student, Department of Mechanical Engineering, Amirkabir University of Technology, Tehran, Iran

Earl H Dowell |
Professor, Department of Mechanical Engineering, Duke University Durham, North Carolina, USA

نشانی اینترنتی https://tava.isav.ir/article_44973_0b1fab769946ddef6d02a81331f039de.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات