این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
شنبه 29 آذر 1404
Physical Chemistry Research
، جلد ۱۲، شماره ۲، صفحات ۳۴۹-۳۵۹
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Investigating the Influence of Alkali over Morphology, Functional Groups, and Physical and Mechanical Properties of Fiber obtained from Cordia Dichotoma (Gum Berry)
چکیده انگلیسی مقاله
Natural fiber is typically derived from plants that exhibit low density, light weight, and abundant availability, along with the added advantage of being biodegradable. The Cardia Dichotoma plant's branches serve as a prominent source of natural cellulose fiber, offering a vast quantity for extraction. However, despite its hydrophilic nature, natural fiber exhibits poor compatibility with both fiber and matrix during the mixing process. To enhance its adhesive properties, the fiber undergoes a series of treatments, including Alkalization, Benzoylation, and Acetylation. In this research, the influence of alkali (untreated, 5%, 10%, and 15% NaOH) was investigated over morphology, functional groups, physical and mechanical properties of fiber obtained from Cardia Dichotoma. SEM indicated bigger pore size, reduced thickness and rough surface with etched striations in alkali-treated samples. FTIR peaks inferred that the use of alkali receded hemicellulose, cellulose and lignin. Tensile Force & Elongation at intervals showed that the mechanical properties of the increasing amount of Alkali reduced the mechanical properties of the fiber by 5 percentages. Conclusively, 5% NaOH was found to be the optimum ratio that effectively removed hemicellulose, cellulose and lignin, however, higher percentage decreased tensile strength and elongation at break of the respective fiber.
کلیدواژههای انگلیسی مقاله
Cordia dichotoma,Fiber,tensile strength,NaOH,Mechanical properties
نویسندگان مقاله
Gul Hassan |
Department of Chemical Engineering, Mehran University of Engineering and Technology Jamshoro, Pakistan
Inamullah Bhatti |
Department of Chemical Engineering, Mehran University of Engineering and Technology Jamshoro, Pakistan
Muhammad Shuaib Shaikh |
Department of Chemical Engineering, Mehran University of Engineering and Technology Jamshoro, Pakistan
نشانی اینترنتی
https://www.physchemres.org/article_178504_0f7978ae0f57ec38798668d898324e03.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات