این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۷، شماره ۲، صفحات ۳۳۷-۳۵۱
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Investigation on Aerodynamic Robustness of Compressor Blade with Asymmetric Leading Edge
چکیده انگلیسی مقاله To improve the aerodynamic characteristics of compressor blades, a novel asymmetric leading edge (ASYLE) has been introduced and shown to offer superior performance. However, the aerodynamic robustness of such specially designed leading edge (LE) remains unclear due to the considerable uncertainty problems it presents. This paper investigates the robustness of ASYLE blade under both geometric and operational uncertainties. Profile deviations within ±0.05mm were introduced to investigate the influence of manufacturing errors. In addition, the perturbated inflow angles between ±0.375° were considered for uncertain inflow conditions. The statistic aerodynamic performance as well as operating dispersibilities at Ma=0.7 were obtained by the non-intrusive polynomial chaos (NIPC) method. The results show that considering uncertain profile errors, the operating range of ASYLE blade is 2.3° wider than original leading edge (ORILE) blade and the dispersion of total pressure loss can be reduced by 53.1% at β1=45.8°. Regarding uncertain inflow angle variations, the total pressure loss dispersion of ASYLE blade can be reduced by 93.8% at β1=50.8°. The ASYLE shows better overall aerodynamic robustness than ORILE upon considering uncertainty limits. The influence propagations in the flow fields of both uncertainties were further analysed, which revealed that the variations of separation bubble structure near LE are the direct cause to the aerodynamic uncertainties. The ASYLE design effectively controls the size and variation of LE separation bubble and thus demonstrates better aerodynamic robustness.
کلیدواژه‌های انگلیسی مقاله Asymmetric leading edge, Aerodynamic robustness, Profile error, Inflow angle perturbation, Uncertainty quantification
نویسندگان مقاله G. Yang |
School of Power and Energy, Northwestern Polytechnical University, Xi’an, Shaanxi, 710129, China

L. Gao |
School of Power and Energy, Northwestern Polytechnical University, Xi’an, Shaanxi, 710129, China

H. Wang |
School of Power and Energy, Northwestern Polytechnical University, Xi’an, Shaanxi, 710129, China

H. Wang |
School of Power and Energy, Northwestern Polytechnical University, Xi’an, Shaanxi, 710129, China

A. K. Goel |
SCSQR, Indian Institute of Technology (IIT), Kharagpur, West Bengal, 721302, India

نشانی اینترنتی https://www.jafmonline.net/article_2349_99cbd3878a0ef0a0f2d8dd918a037478.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات