این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۷، شماره ۱، صفحات ۱۳۶-۱۴۷
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Investigation of An Inverted Bow on Frigate Hull Resistance
چکیده انگلیسی مقاله This study discusses the inverted bow design on the combatant hull form. Changes in the shape of the stem angle and flare bow are used as analytical parameters to investigate the ship's performance. Ship resistance and motion will be predicted using the Computational Fluid Dynamics (CFD) approach using the Reynolds Averaged Navier Stokes (RANS) equation and the k-ε turbulence model. The volume of fluid (VOF) method is applied to simulate the change in the free surface between water and air using an overset mesh technique. The ship's movement is limited to sinkage and trim motions, so the movement's accuracy can be predicted. The results revealed that the inverted bow reduced the total resistance by 6.30%, whereas the trim and sinkage showed no significant changes. The breakdown of the reduction ratio showed that friction resistance components were reduced by 10.62%, wave resistance by 44.05%, and viscous-pressure resistance by 45.33%. This highlights the effectiveness of an inverted bow in optimizing wave and viscous pressure, enhancing overall ship performance.
کلیدواژه‌های انگلیسی مقاله Inverted bow, resistance, Sinkage, Trim, Computational fluid dynamics
نویسندگان مقاله S. Samuel |
Department of Naval Architecture, Faculty of Engineering, Diponegoro University, Semarang, 50275, Indonesia

A. Wicaksono |
Department of Naval Architecture, Faculty of Engineering, Diponegoro University, Semarang, 50275, Indonesia

W. A. Kurniawan |
Department of Naval Architecture, Faculty of Engineering, Diponegoro University, Semarang, 50275, Indonesia

E. S. Hadi |
Department of Naval Architecture, Faculty of Engineering, Diponegoro University, Semarang, 50275, Indonesia

T. Tuswan |
Department of Naval Architecture, Faculty of Engineering, Diponegoro University, Semarang, 50275, Indonesia

A. Trimulyono |
Department of Naval Architecture, Faculty of Engineering, Diponegoro University, Semarang, 50275, Indonesia

M. Muryadin |
Research Center for Hydrodynamics Technology, National Research and Innovation Agency (BRIN), Surabaya 60117, Indonesia

نشانی اینترنتی https://www.jafmonline.net/article_2332_551411d9f491fbb754cc0ad745281e35.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات