این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۷، شماره ۱، صفحات ۲۰۵-۲۱۸
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Novel CFD and DMST Dual Method Parametric Study and Optimization of A Darrieus Vertical Axis Wind Turbine
چکیده انگلیسی مقاله The deteriorating effects of greenhouse gases resulting from the use of fossil fuels have led to increased public attention to renewable energy sources, with wind energy being a particularly favored option. This prompted the development of various wind turbine types' efficiency. This study intends to explore the influence of key design parameters consisting of the number of blades, blade chord length, helical angle, and J-shaped blade on the performance and self-starting ability of a Darrieus VAWT. Furthermore, implementing an efficient optimization model to obtain maximum power based on the numerical findings. To achieve this, two different numerical modeling approaches, namely Computational Fluid Dynamics (CFD) and Double Multi-Streamtube (DMST), have been applied. The results indicated that employing a higher blade number and chord length enhances the starting capability of the turbine. Moreover, increasing the helical angle to 60° reduces the generated torque fluctuations. Inspired by the design of the Savonius turbine, the implementation of a J-shaped airfoil boosted the Cp at low TSR. Finally, the Kriging optimization method has been employed to optimize the design parameters explored through CFD analysis. The outcomes showed that the optimum configuration of the examined Darrieus VAWT comprises a 3-bladed rotor with a blade chord length of 0.04 m and helical angle of 0° and a J-shaped blade length ratio of 0.68. This configuration yields an 10% increase in efficiency at the optimum TSR.
کلیدواژه‌های انگلیسی مقاله Darrieus VAWT, Power coefficient, CFD simulation, DMST simulation, Kriging optimization
نویسندگان مقاله M. Akhlaghi |
Turbomachinery Research Laboratory, Department of Energy Conversion, School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran

M. Asadbeigi |
Turbomachinery Research Laboratory, Department of Energy Conversion, School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran

F. Ghafoorian |
Turbomachinery Research Laboratory, Department of Energy Conversion, School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran

نشانی اینترنتی https://www.jafmonline.net/article_2337_af5cf9e3def8ce49b98cc1fa45854913.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات