این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۶، شماره ۱۲، صفحات ۲۴۲۴-۲۴۳۷
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Computational Analysis of Rheological Secondary Flow in a Pipe-Manifold Containing In-Plane Double Bends
چکیده انگلیسی مقاله Non-Newtonian fluid flow in pipe bends is inevitable in industrial applications. Previous researchers have extensively explored Newtonian flow through curved ducts. However, the non-Newtonian counterpart gets little attention. We study the turbulent flow of shear-dependent fluids obeying the Power-Law model in a pipe manifold containing an in-plane double bend. Ostwald–de Waele's power law is used to model the fluid's rheology. We utilize computational fluid dynamics (CFD) to solve Reynolds-averaged Navier–Stokes (RANS) equations with the k-ε turbulence model. We validate our numerical results with previous experimental results. The in-plane double bend perturbs the flow in the pipe manifold to develop a Prandtl's secondary flow of the first kind. A fully developed flow at the bend upstream is disturbed due to the bend's curvature and regains its fully developed characteristics upon a certain downstream length after the exit of the bend. We study the rheological characteristics of the secondary flow within the bend and the evolution of fluid flow at the bend downstream. We demonstrate that the centrifugal force-dominated secondary flow increases with a decrease of the non-Newtonian power-law index. We capture the camel's-back-shaped velocity profiles within the bend due to accelerating-decelerating flow. The study reveals that the average flow velocity increases along the bend with a corresponding pressure head loss. We quantify this velocity rise by a newly introduced non-dimensional number, viz. enhancement ratio. The double bend's enhancement ratio decreases with an increase in n.
کلیدواژه‌های انگلیسی مقاله Turbulent flow, CFD, Pipe bend, Non-Newtonian fluid, Secondary velocity
نویسندگان مقاله A. Banerjee |
Department of Mechanical Engineering, National Institute of Technology, Durgapur, 713209 (W.B.), India

S. Sengupta |
Department of Mechanical Engineering, National Institute of Technology, Durgapur, 713209 (W.B.), India

S. Pramanik |
Department of Mechanical Engineering, National Institute of Technology, Durgapur, 713209 (W.B.), India

نشانی اینترنتی https://www.jafmonline.net/article_2312_04aab880ff1b556e50f57cae23780ed8.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات