این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۶، شماره ۷، صفحات ۱۴۵۵-۱۴۶۶
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Numerical Simulation of Hydrodynamics Characteristics in a Tank with an Up-down Reciprocating Agitator
چکیده انگلیسی مقاله The hydrodynamics characteristics in a tank with an up-down reciprocating disc agitator were numerically investigated using computational fluid dynamics (CFD) simulations. A dynamic mesh technique along with a user-defined function (UDF) was used to solve the reciprocating movement of the disc agitator in the tank. The dynamic flow field and averaged values of some important parameters were obtained. The verification of the simulation was completed by comparing its results with experimental data in the literature. It is found that the flow pattern in the tank with a reciprocating agitator is characterized by two dynamic vortices, which are above and below the disc, respectively. Flow field, force acting on the disc and power requirement change periodically in the tank. The increase of frequency, amplitude and disc diameter leads to the increase of the averaged velocity in the tank as a whole. Nevertheless, the uniformity of velocity distribution is slightly improved, worsened and greatly improved respectively under the above operating conditions. The averaged values of the force acting on the disc and power consumption are in the second and the third power relations with the reciprocating frequency and amplitude, respectively. The ratio of fluid averaged velocity in one cycle to averaged disc speed, and Newton number are hardly affected by reciprocating frequency and amplitude, while they increase with the enlarged size of the disc agitator.
کلیدواژه‌های انگلیسی مقاله Mixing tank, Reciprocating agitator, Dynamic flow field, Power consumption, CFD simulation
نویسندگان مقاله L. C. Li |
Key Laboratory of Testing Technology for Manufacturing Process of Ministry of Education, Southwest University of Science and Technology, Mianyang, Sichuan 621010, China

E. Fırat |
Department of Mechanical Engineering, Faculty of Engineering, Munzur University, Tunceli, 62000, Turkey

نشانی اینترنتی https://www.jafmonline.net/article_2235_11a223edc776e32fc88e4ce83765ee80.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات