این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۶، شماره ۴، صفحات ۶۵۵-۶۷۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Various Wavy Leading-Edge Protuberance on Oscillating Hydrofoil Power Performance
چکیده انگلیسی مقاله This paper is presented to compare various wavy leading-edge protuberances on oscillating hydrofoil performance and power efficiency. The unsteady turbulent 3D flow simulations were carried out by using the StarCCM+ software. The 3D hydrofoil with a straight at the leading-edge is a NACA0015 section with a chord of 0.24 m and an aspect ratio of 7. Four new types of hydrofoils are proposed with wavy leading-edge protuberance. The RANS equations with the realizable k–ε turbulence model are used to predict the turbulent flow around the hydrofoil under different conditions. In order to validate, a comparison of the numerical results of the forces coefficients and power efficiency of non-protuberance oscillating hydrofoil are shown in good agreement with experimental data. Then, four new profiles on the leading-edge of the hydrofoils are simulated and many results of the pressure distribution, vorticity contour, streamline velocity, and power coefficient for five hydrofoil types are presented and discussed. It is concluded that the hydrofoil of Type-M can achieve constantly higher efficiency of over 46% by employing appropriate heave and pitch amplitudes.
کلیدواژه‌های انگلیسی مقاله Leading-edge protuberance, Oscillating hydrofoils, Pressure distribution, Hydrodynamic performance, Power efficiency
نویسندگان مقاله A. Abbasi |
Marine and Hydrokinetic Energy Group, Department of Maritime Engineering, Amirkabir University of Technology, Tehran, Iran

H. Ghassemi |
Marine and Hydrokinetic Energy Group, Department of Maritime Engineering, Amirkabir University of Technology, Tehran, Iran

H. Ghafari |
Marine and Hydrokinetic Energy Group, Department of Maritime Engineering, Amirkabir University of Technology, Tehran, Iran

Z. M. Liu |
Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing 100124, China

نشانی اینترنتی https://www.jafmonline.net/article_2171_33a963dae0dda750ab7d76317a8882a5.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات