این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۶، شماره ۴، صفحات ۸۹۱-۹۰۴
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Steady-State Characteristics of Spiral Groove Floating Ring Gas-film Seal Considering Temperature-Viscosity Effect
چکیده انگلیسی مقاله During the operation of the floating ring gas film seal, a certain amount of heat is generated inside the seal gap, giving rise to thermal deformation of the seal rings, and further leading to operation unstable and increased leakage rate. Based on the gas lubrication theory, the control equations of gas pressure and gas film thickness of the floating ring gas film seal are obtained. And the energy and temperature-viscosity equation are also introduced. The above equations were solved by the finite difference method and their correctness was verified by experiments. The variation of opening force, leakage rate, friction force, and gas film temperature rise with rotating speed, inlet pressure, and eccentricity were analyzed. The results reveal that, for leakage rate, the difference between the modeled and tested values is only 2.94% at high speeds, taking into account the influence of the temperature-viscosity effect. The experiment substantiates that the temperature-viscosity effect model is scientifically valid. Operation parameters also have different effects on sealing performance. Compared with isothermal flow, the pressure distribution in the gas film flow field will change significantly with increasing gas temperature, which means that the temperature-viscosity effect cannot be neglected in the flow field calculation. These results provide grounds for further study of the thermoelastic effect of air film seal of floating ring and have important engineering significance.
کلیدواژه‌های انگلیسی مقاله Gas seal, Microgroove, Thermo-hydrodynamic lubrication, Hydrodynamic effect, Numerical simulation, Lubrication performance
نویسندگان مقاله W. Shipeng |
College of Petrochemical Engineering, Lanzhou University of Technology, Lanzhou, Gansu 730050, China

D. Xuexing |
College of Petrochemical Engineering, Lanzhou University of Technology, Lanzhou, Gansu 730050, China

D. Junhua |
College of Petrochemical Engineering, Lanzhou University of Technology, Lanzhou, Gansu 730050, China

W. Jingmo |
College of Petrochemical Engineering, Lanzhou University of Technology, Lanzhou, Gansu 730050, China

نشانی اینترنتی https://www.jafmonline.net/article_2188_ffad99af654f681161586ac13ebbf406.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات