این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
شنبه 22 آذر 1404
Journal of Applied Fluid Mechanics
، جلد ۱۵، شماره ۶، صفحات ۱۹۴۷-۱۹۵۵
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Experimental Investigation of Aluminum Oxide Nanofluid on Closed Loop Pulsating Heat Pipe Performance
چکیده انگلیسی مقاله
This paper discusses the experimental studies performed on a single closed loop pulsating heat pipe (CLPHP) to evaluate its thermal performance. The pulsating heat pipe is brass which has a single closed loop. Aluminium oxide (Al
2
O
3
) and deionized (DI) water nanofluid were utilized as working fluids, with different volume concentrations of aluminium oxide nanoparticles of 0.05 %, 0.5 % and 1%. The aluminium oxide particles are mixed with water in the two-step method to produce a stable suspension. Experiments are carried out in the horizontal mode with watt loads of heat inputs ranging from 10 w to 100 w. The temperature differences between the evaporator and condenser portions, thermal resistance, heat transfer coefficient and thermal conductivity are the parameters used to determine thermal performance. The thermal resistance of aluminium oxide and DI water nanofluid was the lowest, having 48 % less than that of water. The effective thermal conductivity of the heat pipe improves as the concentration of nanoparticles increases. The comparison between experimental results and computational fluid dynamics (CFD) simulation results CLPHP was carried out under the same condition.
کلیدواژههای انگلیسی مقاله
Nanofluid, Pulsating heat pipe, Adiabatic section, Thermo-hydrodynamic, Working fluid
نویسندگان مقاله
P. Venkataramana |
JNTU College of Engineering, Kakinada, Department of Mechanical Engineering, Andhra Pradesh, 533003, India
P. Vijayakumar |
Lakireddy Balireddy College of Engineering, Department of Mechanical Engineering, Mylavaram, Andhra Pradesh,521320, India
B. Balakrishna |
JNTU College of Engineering, Kakinada, Department of Mechanical Engineering, Andhra Pradesh, 533003, India
نشانی اینترنتی
https://www.jafmonline.net/article_2116_10342758131f0ad2914ed48f631ae188.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات