این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۵، شماره ۲، صفحات ۵۵۱-۵۶۱
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Improvement of Mass Transfer Rate Modeling for Prediction of Cavitating Flow
چکیده انگلیسی مقاله This study proposes and investigates the impact of a modification, accounting for the influence of vortices and flow properties on the liquid rupture, to improve the modeling of mass transfer rate in cavitation.  The threshold phase-change pressure is calculated by the fluid-saturated pressure at rest and the added vortex pressure term. The explicit simulation of the fully turbulent, homogeneous compressible, cavitating flow around the NACA0015 hydrofoil and the hemispherical body is performed. Saito cavitation model and Wilcox k-ω turbulence model are implemented for the evaluation of the proposed modification. The pressure coefficient distribution -Cp and cavitation behavior, including the vapor formation-collapse processes and the flow mechanism, are investigated. The analysis shows that the present modification, coupled the local flow viscosity with the vorticity magnitude, making the cavitation model better sensitive to the flow condition. The modification has a weak impact on the steady sheet cavitation around a hemispherical body but is the key factor underlying the improvement in the predicted complex flow around the NACA0015 hydrofoil. In that, the predicted -Cp and cavity structure around the hydrofoil is improved in comparison with the existing numerical data by other research groups and that by the Singhal turbulent pressure fluctuation model‎.
کلیدواژه‌های انگلیسی مقاله Cavitation, homogeneous model, NACA0015 Hydrofoil, saturated pressure, K-ω turbulent model, vorticity magnitude, Hemispherical body
نویسندگان مقاله A. D. Le |
School of Aerospace Engineering, VNU-University of Engineering and Technology, Vietnam National University (Hanoi), 144 Xuanthuy, Caugiay, Hanoi, Vietnam

H. T. Tran |
Faculty of Aerospace Engineering, Le Quy Don Technical University, 236 Hoang Quoc Viet, Cau Giay, Hanoi, Vietnam

نشانی اینترنتی https://www.jafmonline.net/article_2011_52a494279f594d0758361c35b57c1496.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات