این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۵، شماره ۱، صفحات ۱۱۷-۱۲۷

عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله

عنوان انگلیسی Numerical Study on the Effect of Jet on the Operation of Powder Fuel Scramjet
چکیده انگلیسی مقاله Metal powder fuel has high energy and volume calorific values, and it is an excellent power fuel for hypersonic aircraft in the future. However, metal powder has poor flow characteristics and is difficult to be effectively mixed with air when supersonic air is injected. The mixing degree of fuel and air is an important factor to the efficiency of the engine. One way to solve this problem is to introduce a jet (the primary jet) upstream of the powder fuel inlet to improve the mixing degree of fuel and increase the residence time. In this study, a doublehole jet two-dimensional scramjet combustor structure was established, the effects of different initial jet conditions on the performance of scramjets was studied and analyzed. The results show that the introduction of the primary jet can effectively improve the mixing degree of the powdered fuel and air in the combustion chamber, prolong the residence time of the particles in the combustion chamber and improves the combustion efficiency of the metal powder. However, both the combustion efficiency of the metal powder fuel and engine thrust increase and then decrease when the mass flow rate of the primary jet increases.
کلیدواژه‌های انگلیسی مقاله Scramjet, Numerical simulation, Powder fuel, Jet, Combustion efficiency

نویسندگان مقاله H. M. Ding |
School of Mechanical and Engineering, Nanjing University of Science and Technology, Nanjing 210094, China

C. Zhuo |
School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing, Jiangsu, 210094, China

W. J. Hu |
Yibin North Chuan’an Chemical Industry Co., Ltd, Sichuan 644219, China

H. Y. Deng |
School of Mechanical and Engineering, Nanjing University of Science and Technology, Nanjing 210094, China

X. Chen |
School of Mechanical and Engineering, Nanjing University of Science and Technology, Nanjing 210094, China


نشانی اینترنتی https://www.jafmonline.net/article_1904_14b7cc4fba95fdf29edb9cbf2981dac0.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات