این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۵، شماره ۱، صفحات ۱۵۳-۱۶۷
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Influence of Blade Lean on Performance and Shock Wave/Tip Leakage Flow Interaction in a Transonic Compressor Rotor
چکیده انگلیسی مقاله Blade lean has been extensively used in axial compressor stators to control flow separations, but its influence mechanism on transonic compressor rotors remains to be revealed. The aim of this study is to numerically explore the influence of blade lean on the performance and shock wave/tip leakage flow interaction in a transonic compressor rotor. The effects of leaned pattern (positively lean and negatively lean), leaned angle and leaned height were studied. Results showed that, compared with baseline configuration, the efficiency and total pressure ratio of the entire constant rotating speed line of positively leaned rotor were both decreased. The absolute value of peak efficiency was reduced by as much as 4.34% at 20° lean angle, whereas the maximum reduction of peak total pressure ratio was 0.1 at 20° lean angle. The tip leakage flow streamlines of baseline transonic rotor can be divided into two parts, i.e., the primary vortex and secondary vortex which arises after the shock. Due to shock/tip leakage vortex interaction, the primary vortex enlarged and low-momentum region showed up after the shock; under near stall (NS) condition, tip leakage vortex breakdown occurred after interacting with shock. As positively leaned angle increased, the shock and the shock/tip leakage vortex interaction point moved upstream. In addition, the phenomenon of tip leakage vortex breakdown was enhanced. For negatively leaned rotors, as negatively leaned angle increased, the peak efficiency and total pressure ratio showed a tendency of first increasing and then decreasing. At 5° leaned angle, the peak efficiency was increased by 0.8% at most, and the maximum increment of total pressure ratio was 0.05 at 5° leaned angle. Besides, the loading of blade tip reduced and the loading moved toward trailing edge, resulting in the downstream movements of primary vortex, shock front and shock/tip leakage vortex interaction location. The results may help to improve the near tip flow field of transonic compressor rotor with leaned blade technology.
کلیدواژه‌های انگلیسی مقاله Blade lean, Tip leakage vortex, Shock/Tip leakage flow interaction, Transonic compressor
نویسندگان مقاله Z. Cao |
School of Power and Energy, Northwestern Polytechnical University, Xi’an 710072, China

X. Zhang |
School of Power and Energy, Northwestern Polytechnical University, Xi’an 710072, China

Y. Liang |
School of Power and Energy, Northwestern Polytechnical University, Xi’an 710072, China

B. Liu |
School of Power and Energy, Northwestern Polytechnical University, Xi’an 710072, China

نشانی اینترنتی https://www.jafmonline.net/article_1907_19e6402ce4a378593be8e0e431d19b83.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات