این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۴، شماره ۵، صفحات ۱۴۶۹-۱۴۸۲
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Patient Specific Modelling of Blood Flow in Coronary ‎Artery
چکیده انگلیسی مقاله The performance of the heart is considerably affected by the blocks formed because of the deposition of ‎plaque inside the coronary artery. The blocks (stenosis) either in coronary artery or elsewhere force the ‎heart to work harder for pumping the oxygenated blood to the heart muscles and blood vessels. This ‎study analyses the flow through the stenosed coronary arteries via numerical modelling by using ANSYS ‎FLUENT software. Three real cases with different asymmetric stenosis levels (i.e., block level 33%, 66% ‎& 85%) are analysed by considering blood as a non-Newtonian fluid, and blood flow as pulsatile in ‎nature. As the flow regime falls in transition to turbulent region, the transition Shear Stress Transport ‎‎(SST) k-ω turbulence model is used to take care of the changeover stage from laminar to turbulent flow ‎and vice versa. The results show large variation both in Wall Shear Stress (WSS) and pressure drop near ‎the stenosis. Pressure drop becomes more significant at severe degrees of stenosis (66% and 85%) ‎compared to the mild case (33%). The study throws light on the critical distribution of shear stress and ‎pressure drop along the artery wall, which are considered as indicators of the commencement of heart ‎disease and further growth of stenosis. An indicator, viz., Fractional Flow Reserve (FFR), which relates ‎the percentage of stenosis to the pressure variations, can be used as an index to diagnose the severity of ‎stenosis. All the three cases with different stenotic levels were analysed under hyperaemic conditions and ‎found that even 45% stenosis case can go near to critical at hyperaemic flow conditions. The effect of ‎severity due to vessel constriction can be estimated by comparing the simulated pressure drop and WSS ‎before and after the stenosis, with the ones for a healthy artery. The present study developed a ‎methodology to calculate FFR value for unknown percentage of stenosis based on the simulated results ‎obtained from 33%, 66% and 85% stenosis. Thus, criticality of a patient with certain percentage stenosis ‎can also be evaluated. This simulation technique can be recommended as a non-invasive diagnostic tool ‎for the early detection of atherosclerosis‎‎.
کلیدواژه‌های انگلیسی مقاله Coronary artery, Flow rate, Pressure relation, Stenosis, Fractional flow reserve.‎, wall shear stress
نویسندگان مقاله B. Thomas |
Department of Civil Engineering, Government Engineering College, Thrissur, Kerala, PIN:680009, India

K. S. Sumam |
Department of Civil Engineering, Government Engineering College, Thrissur, Kerala, PIN:680009, India

N. Sajikumar |
Department of Civil Engineering, Government Engineering College, Thrissur, Kerala, PIN:680009, India

نشانی اینترنتی https://www.jafmonline.net/article_1177_0ebf149a14e723ffb38702188e8d7d16.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات