این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۴، شماره ۴، صفحات ۱۲۰۹-۱۲۲۲
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی An Integrated Turbocharger Matching Program for Internal ‎Combustion Engines
چکیده انگلیسی مقاله Following the global environmental concerns, many automobile manufacturers intend to produce smaller ‎engines, aiming to lower emissions and fuel consumption. As compensation for performance reduction, these ‎engines are equipped with turbochargers. One of the challenges is to select the right turbocharger for a specific ‎engine. In this regard, an integrated zero-dimensional turbocharger and engine simulation program is ‎developed, employing a quasi-steady compressible flow method. The program gives the designer the ‎possibility of observing the performance of different compressor-turbine combinations on an internal ‎combustion engine. Engine details such as fuel, cylinder geometry, heat transfer conditions, valve timing, and ‎spark timing are considered within the engine modeling, and the designer can investigate their effects on the ‎overall performance of the system. Compressor and turbine performances are predicted by their previously ‎provided performance maps (steady-state characteristic curves) and special inter- and extrapolation methods. ‎A new algorithm for turbocharger matching is suggested, and its logics, basic convergence loops, and ‎thermodynamic equations have been described in detail. A database containing digitized compressor and ‎turbine maps and details provided by different manufacturers is created and integrated into the program. An ‎existing turbocharged engine has been tested and also simulated by the program. The accuracy of the program ‎results is evaluated by comparing them with experimental results. The maximum error of modeling the engine ‎and the whole simulation is 1.5% and 16%, respectively. Two other compressor-turbine combinations have ‎been evaluated using the program, one of which is suggested as an alternative‎‎.
کلیدواژه‌های انگلیسی مقاله Internal combustion engine, Turbocharger matching, Engine ‎performance simulation, Zero, dimensional simulation, Engine downsizing‎
نویسندگان مقاله S. Mousavi |
School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran‎

A. Nejat |
School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran‎

S. S. Alaviyoun |
Mechanical Engineering, K.N. Toosi University of Technology and Design Department of ‎Iran Khodro Powertrain Company, Tehran, Iran

M. Nejat |
Mechanical Engineering, Iran Khodro Powertrain Company, Tehran, Iran

نشانی اینترنتی https://www.jafmonline.net/article_1153_23a60a8357e54c81810f9742f01ab835.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات