این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۴، شماره ۳، صفحات ۷۰۳-۷۱۴
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Passive Control with Blade-End Slots and Whole-Span Slot in a Large Camber Compressor Cascade
چکیده انگلیسی مقاله Suitable slot structure of the compressor blade can generate high-momentum jet flow through pressure difference between the pressure and suction surface, it has been proved that the slot jet flow can reenergize the local low-momentum fluid to effectively suppress the flow separation on the suction surface. In order to explore a slotted method for better comprehensive suppressing effects on the boundary layer separation near blade midspan and the three-dimensional corner separation, a diffusion stator cascade with large camber angle is selected as the research object. Firstly, the Slotted_1 and Slotted_2 whole-span slotted schemes are set up, then the Slotted_3 scheme with whole-span slot and blade-end slots is proposed, finally the performance of original cascade and slotted cascades is computed under a wide range of incidence angles at the Mach number of 0.7. The results show that: in the full range of incidence angles, compared with the whole-span slotted cascades, the development of the endwall secondary flow on the suction surface of Slotted_3 cascade is effectively suppressed, the degree of the mutual interference between the secondary flow and the main flow is reduced. Besides, on the suction surface of Slotted_3 cascade, the boundary layer separation near blade midspan and the corner separation are basically eliminated. As a result, compared with those of original cascade, the total pressure losses of Slotted_3 cascade are reduced in the full range of incidence angles, and its operating range of incidence angles is broadened. Moreover, compared with the whole-span slotted schemes, Slotted_3 scheme has a better adaptability to wide range of incidence angles.
کلیدواژه‌های انگلیسی مقاله High, momentum jet, Whole, Boundary layer separation, span slot, Three, dimensional corner separation, Blade, end slots, Total pressure loss
نویسندگان مقاله H. Wang |
School of Power and Energy, Northwestern Polytechnical University, Xi’an, Shaanxi, 710072, P. R. China

B. Liu |
School of Power and Energy, Northwestern Polytechnical University, Xi’an, Shaanxi, 710072, P. R. China

B. Zhang |
School of Power and Energy, Northwestern Polytechnical University, Xi’an, Shaanxi, 710072, P. R. China

نشانی اینترنتی https://www.jafmonline.net/article_1115_8dd9d53dc20db71e1f81bfaf4f22c809.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات