این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
یکشنبه 23 آذر 1404
Journal of Applied Fluid Mechanics
، جلد ۱۴، شماره ۳، صفحات ۸۱۹-۸۳۲
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Investigation on Flow Characteristics and Parameters Optimization of a New Concept of TC Nozzle
چکیده انگلیسی مقاله
Lighter weight, simpler structure and throat area controllable are the developing trends of aircraft engine exhaust system. To meet these challenges, a new concept of hybrid throat control (TC) nozzle was proposed to improve the control efficiency of throat area (η) by using a rotary valve with secondary injection. The flow mechanism of the hybrid TC nozzle and the effect of aerodynamic and geometric parameters on nozzle performance were investigated numerically. Then the approximate model characterizing the hybrid TC nozzle was established with design of experiment and response surface methodology. The approximate model was used to analysis the coupling effect between parameters and optimized the parameter combination. The results show that the flow area of the nozzle can be restricted effectively by the rotary valve and the secondary flow, and η is bigger than 5.24. Nozzle pressure ratio and secondary pressure ratio are the dominant factors for the nozzle throat area control performance. The optimization of the parameter combination was carried out with penalty function approach, with ratio of throat area control being 30 percent and corrected mass flow ratio of secondary flow being 5 percent The maximize error of the optimization result is 4.13 percent and it verifies the validity and feasibility of the approximate model.
کلیدواژههای انگلیسی مقاله
Throat area control, Hybrid TC nozzle, Flow characteristics, Performance optimization, approximate model
نویسندگان مقاله
F. Song |
Shaanxi Key Laboratory of Internal Aerodynamic in Aero-Engine, School of Engine and Energy, Northwestern Polytechnical University, Xi’an, Shaanxi, 710129, China
L. Zhou |
Shaanxi Key Laboratory of Internal Aerodynamic in Aero-Engine, School of Engine and Energy, Northwestern Polytechnical University, Xi’an, Shaanxi, 710129, China
J. W,. Shi |
Shaanxi Key Laboratory of Internal Aerodynamic in Aero-Engine, School of Engine and Energy, Northwestern Polytechnical University, Xi’an, Shaanxi, 710129, China
Z. X. Wang |
Shaanxi Key Laboratory of Internal Aerodynamic in Aero-Engine, School of Engine and Energy, Northwestern Polytechnical University, Xi’an, Shaanxi, 710129, China
نشانی اینترنتی
https://www.jafmonline.net/article_1125_1c6bdcb81a867032956d363f137b40cd.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات